Difficulty

Moderate

Steps

6

Time Required

                          5 minutes            

Sections

2

  • Back Panel
  • 3 steps
  • Battery
  • 3 steps

Flags

0

  • BackHP 8 1401

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

1024

Step 2

  • Insert the tip of a plastic opening tool in the seam between the front and back panels.

Insert the tip of a plastic opening tool in the seam between the front and back panels.

Step 3

  • Slide the plastic opening tool around all edges of the device until the back panel detaches.
  • Lift off the back panel.

Slide the plastic opening tool around all edges of the device until the back panel detaches.

Lift off the back panel.

Step 4

              Battery               
  • Using a spudger or your fingers, disconnect the power cable by sliding the connector out of the socket on the motherboard.

Using a spudger or your fingers, disconnect the power cable by sliding the connector out of the socket on the motherboard.

Step 5

  • Using a plastic card or a nylon spudger, carefully pry the battery from the adhesive on the tablet.
  • Do not use a metal spudger, which may damage/puncture the battery and pose a hazard.

Using a plastic card or a nylon spudger, carefully pry the battery from the adhesive on the tablet.

Do not use a metal spudger, which may damage/puncture the battery and pose a hazard.

Step 6

  • Once the battery is removed the battery and tablet should look like this.

Once the battery is removed the battery and tablet should look like this.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Katie Presz                     

Member since: 01/16/2019

641 Reputation

                                      6 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       University of Alabama, Team S1-G1, Bedsole Spring 2019                        

                                                  Member of University of Alabama, Team S1-G1, Bedsole Spring 2019 



                    UA-BEDSOLE-S19S1G1                     


                                            4 Members                     


                                            6 Guides authored