Hp 7 Plus 1301 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

• Speaker
• 5 steps

Flags

0

• BackHP 7 PLUS 1301

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speaker               

• Make sure the device is off and not plugged in before starting.
• Use the Torx T5 screwdriver and remove the 3mm screws on all four corners of the device.

Make sure the device is off and not plugged in before starting.

Use the Torx T5 screwdriver and remove the 3mm screws on all four corners of the device.

1024

Step 2

• Using the plastic opening tool, push in between the front, then slide it around.
• Slide the plastic opening tool all the way around the tablet to separate the back cover.
• Be careful when trying to remove the back as the screen can be damaged with excessive force.

Using the plastic opening tool, push in between the front, then slide it around.

Slide the plastic opening tool all the way around the tablet to separate the back cover.

Be careful when trying to remove the back as the screen can be damaged with excessive force.

Step 3

• Continue sliding the plastic opening tool around the tablet until the cover fully separates from the device.
• Remove the back cover.

Continue sliding the plastic opening tool around the tablet until the cover fully separates from the device.

Remove the back cover.

Step 4

• Using tweezers, carefully remove the speaker connector from the socket.

Using tweezers, carefully remove the speaker connector from the socket.

Step 5

• Insert a spudger in the bottom right of the speaker. It makes the speaker easier to come off.
• Carefully remove the speaker with your hand.
• Some force needs to be applied here due to the adhesive on the other side of the speaker.

Insert a spudger in the bottom right of the speaker. It makes the speaker easier to come off.

Carefully remove the speaker with your hand.

Some force needs to be applied here due to the adhesive on the other side of the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Shao-Hung Hsiao                     

Member since: 02/05/2019

201 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UC Davis, Team S20-G6, Lore Winter 2019                        

                                                  Member of UC Davis, Team S20-G6, Lore Winter 2019 



                    UCD-LORE-W19S20G6                     


                                            3 Members                     


                                            4 Guides authored