Hp 7 1800 Display Replacement Repair Guide

Difficulty

Difficult

Steps

11

Time Required

                          15 - 20 minutes            

Sections

3

• Battery
• 2 steps
• Motherboard
• 5 steps
• Display
• 4 steps

Flags

0

• BackHP 7 1800

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the back panel               

• Carefully insert a Spudger into one of the corners of the tablet.
• Slide the Spudger along the edge popping the tabs out along the way.
• Be careful not to break the tabs.

Carefully insert a Spudger into one of the corners of the tablet.

Slide the Spudger along the edge popping the tabs out along the way.

Be careful not to break the tabs.

1024

Step 2

              Remove the battery               

• Slide the Spudger under the battery to lift it off the adhesive.
• Gently pull the cable connection from the motherboard using tweezers.

Slide the Spudger under the battery to lift it off the adhesive.

Gently pull the cable connection from the motherboard using tweezers.

Step 3

              Remove the large ribbon cable               

• Remove the larger ribbon cable by gently flipping the beige latch and pulling it out with tweezers.

Remove the larger ribbon cable by gently flipping the beige latch and pulling it out with tweezers.

Step 4

              Remove the smaller ribbon cable               

• Remove the smaller ribbon cable by gently flipping the black latch and pulling it out with tweezers.

Remove the smaller ribbon cable by gently flipping the black latch and pulling it out with tweezers.

Step 5

              Unscrew the 7 silver screws from the logic board               

• Remove the following 7 screws:
• Six 4.17mm Phillips #00 around the motherboard.
• One 2.67mm Phillips #00 next to the front facing camera.
• The 2.67mm screw circled in yellow is notably shorter than the other 6 screws circled in red.

Remove the following 7 screws:

Six 4.17mm Phillips #00 around the motherboard.

One 2.67mm Phillips #00 next to the front facing camera.

The 2.67mm screw circled in yellow is notably shorter than the other 6 screws circled in red.

Step 6

              Unplug the front facing camera from the logic board               

• Gently pry the front facing camera plug up and off of the motherboard.

Gently pry the front facing camera plug up and off of the motherboard.

Step 7

              Remove the logic board               

• Carefully lift the motherboard directly up.

Carefully lift the motherboard directly up.

Step 8

              Remove the ribbon cable attached to the metal plate               

• On the metal plate inside of the device, there is a ribbon cable in a loop. Flip the white tab and pull the cable out.

On the metal plate inside of the device, there is a ribbon cable in a loop. Flip the white tab and pull the cable out.

Step 9

              Unscrew the 7 black screws on the metal plate               

• Unscrew the following black screws:
• Seven 2.82mm Phillips #00 around the metal casing.

Unscrew the following black screws:

Seven 2.82mm Phillips #00 around the metal casing.

Step 10

              Remove the metal plate               

• Gently lift the metal plate directly up.

Gently lift the metal plate directly up.

Step 11

              Remove the display               

• Gently lift the display directly up.

Gently lift the display directly up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    TMD                     

Member since: 01/21/2015

765 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       USF Tampa, Team 4-1, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 4-1, Brown Winter 2015 



                    USFT-BROWN-W15S4G1                     


                                            4 Members                     


                                            14 Guides authored                     

Karen Porter - Dec 5, 2018

Reply

I have this same tablet but I cannot find a replacement screen. Do you know where I could find one?

akiel panchan - Oct 26, 2020

I have the same problem