Hp 15 F305Dx Screen Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 minutes            

Sections

2

• Battery
• 4 steps
• Screen
• 4 steps

Flags

3

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHp 15-f305dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

1024

Step 2

• Turn the computer upside down on a flat surface.

Turn the computer upside down on a flat surface.

Step 3

• Firmly slide the release latch to unlock the battery and slide the battery release latch to release the battery.

Firmly slide the release latch to unlock the battery and slide the battery release latch to release the battery.

Step 4

• Lift the battery from the middle and then pivot it outward to remove it from the computer.

Lift the battery from the middle and then pivot it outward to remove it from the computer.

Step 5

              Screen               

• Remove the bezel by prying it away from the screen using the spudger.
• Note: Some models may have two screws hidden behind round covers in the lower section of the bezel.

Remove the bezel by prying it away from the screen using the spudger.

Note: Some models may have two screws hidden behind round covers in the lower section of the bezel.

Step 6

• Remove the four 3mm PH1 Phillips head screws in each corner of the screen and do not care about outer screws.

Remove the four 3mm PH1 Phillips head screws in each corner of the screen and do not care about outer screws.

Step 7

• Remove the screen and place the screen very softly on the keyboard.

Remove the screen and place the screen very softly on the keyboard.

Step 8

• Remove the sticker gently and disconnect the metal blade.

Remove the sticker gently and disconnect the metal blade.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Brandon                     

Member since: 03/23/2018

681 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team S2-G3, Bernier Spring 2018                        

                                                  Member of UMass Dartmouth, Team S2-G3, Bernier Spring 2018 



                    UMASSD-BERNIER-S18S2G3                     


                                            3 Members                     


                                            4 Guides authored