Difficulty
Easy
Steps
7
Time Required
4 - 10 minutes
Sections
2
- Battery
- 4 steps
- RAM
- 3 steps
Flags
1
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackHp 15-f305dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
RAM is temporary computer storage that stores and reads data almost instantly. When opening a program, it becomes temporarily stored in your computer’s RAM. Opening multiple browser tabs or too many applications at once may slow your computer significantly. Adding more RAM to a computer allows for larger quantities of applications to run at the same time without a loss in performance.
Before using this guide, ensure your laptop’s battery has been removed so there is no chance of electric shock.
What you need
Step 1
Battery
- Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
1024
Step 2
- Turn the computer upside down on a flat surface.
Turn the computer upside down on a flat surface.
Step 3
- Firmly slide the release latch to unlock the battery and slide the battery release latch to release the battery.
Firmly slide the release latch to unlock the battery and slide the battery release latch to release the battery.
Step 4
- Lift the battery from the middle and then pivot it outward to remove it from the computer.
Lift the battery from the middle and then pivot it outward to remove it from the computer.
Step 5
RAM
- Remove the two 5mm Phillips #00 screws on the back service cover.
Remove the two 5mm Phillips #00 screws on the back service cover.
Step 6
- With the hinge of the laptop screen facing away, remove the panel from the laptop on the near side of you.
With the hinge of the laptop screen facing away, remove the panel from the laptop on the near side of you.
Step 7
- Press the two locking arms on either side of the RAM card away from each other.
- When the RAM is free from the locking arms, it should pop up to rest at an angle to the laptop.
- Remove the RAM card by sliding it out from its port at the same angle at which it rests.
- During reinstallation, insert the RAM card into the slot at the same angle which it rested earlier, then press it down until the locking arms clasp around it.
Press the two locking arms on either side of the RAM card away from each other.
When the RAM is free from the locking arms, it should pop up to rest at an angle to the laptop.
Remove the RAM card by sliding it out from its port at the same angle at which it rests.
During reinstallation, insert the RAM card into the slot at the same angle which it rested earlier, then press it down until the locking arms clasp around it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Garrett Peal
Member since: 10/03/2019
217 Reputation
2 Guides authored
Badges:
3
Team
The Citadel Military College of South Carolina, Team S1-G19, Eggleston Fall 2019
Member of The Citadel Military College of South Carolina, Team S1-G19, Eggleston Fall 2019
CMCSC-EGGLESTON-F19S1G19
2 Members
2 Guides authored