Difficulty

Easy

Steps

6

Time Required

                          15 minutes

Sections

2

  • Battery
  • 3 steps
  • WLAN Module
  • 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Notebook 15-db0000 Series

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Power off the device before starting.
  • Remove the rubber strips that hide the screws using the spudger.
  • Flip the device and unscrew the eleven screws with a Phillips #0 screwdriver.

Power off the device before starting.

Remove the rubber strips that hide the screws using the spudger.

Flip the device and unscrew the eleven screws with a Phillips #0 screwdriver.

1024

Step 2

  • Use the spudger tool to pry open the back cover.
  • Lift the back panel to access the inside.
  • Slide the CD drive to the left, and remove.

Use the spudger tool to pry open the back cover.

Lift the back panel to access the inside.

Slide the CD drive to the left, and remove.

Step 3

  • Unscrew the three battery screws with a Phillips #0 screwdriver.
  • Lift the battery up, disconnecting the connector first.
  • Push forward and remove the battery.

Unscrew the three battery screws with a Phillips #0 screwdriver.

Lift the battery up, disconnecting the connector first.

Push forward and remove the battery.

Step 4

              WLAN Module
  • Disconnect the wire attached to the WLAN card by prying it upward from the card.

Disconnect the wire attached to the WLAN card by prying it upward from the card.

Step 5

  • Remove the screw holding down the card with a Phillips #0 screwdriver.

Remove the screw holding down the card with a Phillips #0 screwdriver.

Step 6

  • Pull the WLAN Module out of the connection port.

Pull the WLAN Module out of the connection port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Daniel McGuire

Member since: 01/29/2020

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       Embry-Riddle Aeronautical University, Team S2-G5, Watkins Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S2-G5, Watkins Spring 2020 



                    ERAU-WATKINS-S20S2G5                     


                                            5 Members                     


                                            7 Guides authored