Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

2

  • Battery
  • 3 steps
  • Hard Drive
  • 2 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackHP Notebook 15-db0000 Series

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Power off the device before starting.
  • Remove the rubber strips that hide the screws using the spudger.
  • Flip the device and unscrew the eleven screws with a Phillips #0 screwdriver.

Power off the device before starting.

Remove the rubber strips that hide the screws using the spudger.

Flip the device and unscrew the eleven screws with a Phillips #0 screwdriver.

1024

Step 2

  • Use the spudger tool to pry open the back cover.
  • Lift the back panel to access the inside.
  • Slide the CD drive to the left, and remove.

Use the spudger tool to pry open the back cover.

Lift the back panel to access the inside.

Slide the CD drive to the left, and remove.

Step 3

  • Unscrew the three battery screws with a Phillips #0 screwdriver.
  • Lift the battery up, disconnecting the connector first.
  • Push forward and remove the battery.

Unscrew the three battery screws with a Phillips #0 screwdriver.

Lift the battery up, disconnecting the connector first.

Push forward and remove the battery.

Step 4

              Hard Drive
  • Remove the four screws on the hard drive bracket with a Phillips #0 screwdriver.
  • Pull the hard drive bracket out.

Remove the four screws on the hard drive bracket with a Phillips #0 screwdriver.

Pull the hard drive bracket out.

Step 5

  • Remove the hard drive from the connector by sliding it to the left until the connector is disengaged.

Remove the hard drive from the connector by sliding it to the left until the connector is disengaged.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 5 other contributors 


                    Steven Dankiewicz

Member since: 01/29/2020

382 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Embry-Riddle Aeronautical University, Team S2-G5, Watkins Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S2-G5, Watkins Spring 2020 



                    ERAU-WATKINS-S20S2G5                     


                                            5 Members                     


                                            7 Guides authored