Difficulty

Easy

Steps

7

Time Required

                          30 minutes - 1 hour

Sections

1

  • Hard Drive
  • 7 steps

Flags

0

  • BackHP 15-bs080wm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive
  • Power off the laptop.
  • Do not proceed until both power lights are off.

Power off the laptop.

Do not proceed until both power lights are off.

1024

Step 2

  • Slide the battery lock to the unlock position..
  • Slide the battery release inwards to remove the battery.

Slide the battery lock to the unlock position..

Slide the battery release inwards to remove the battery.

Step 3

  • Use the plastic opening tool to remove the four rubber feet.

Use the plastic opening tool to remove the four rubber feet.

Step 4

  • Remove the center screw from the back of the laptop using a Phillips #000 screwdriver.
  • Remove the optical drive.

Remove the center screw from the back of the laptop using a Phillips #000 screwdriver.

Remove the optical drive.

Step 5

  • Remove the nine screws from the back of the laptop using a Phillips #000 screwdriver.

Remove the nine screws from the back of the laptop using a Phillips #000 screwdriver.

Step 6

  • Use the plastic opening tool to wedge the back plate from the body of the laptop.
  • Flip the laptop over and remove the back plate.
  • Use the opening tool around the entire perimeter of the laptop’s base.

Use the plastic opening tool to wedge the back plate from the body of the laptop.

Flip the laptop over and remove the back plate.

Use the opening tool around the entire perimeter of the laptop’s base.

Step 7

  • Remove the three screws from the hard drive bracket using a Phillips #000 screwdriver.
  • Remove the bracket.
  • Slide the hard drive the left to remove it from the socket.

Remove the three screws from the hard drive bracket using a Phillips #000 screwdriver.

Remove the bracket.

Slide the hard drive the left to remove it from the socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Landon Dickerson

Member since: 02/22/2022

195 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of North Texas, Team 1-4, Raign Spring 2022                        

                                                  Member of University of North Texas, Team 1-4, Raign Spring 2022 



                    UNT-RAIGN-S22S1G4                     


                                            2 Members                     


                                            1 Guide authored