Difficulty

Easy

Steps

10

Time Required

Suggest a time??

Sections

3

  • Battery
  • 3 steps
  • Optical Drive
  • 2 steps
  • Wireless Card
  • 5 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackHP 15-ay014dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Disconnect device from power source and power down.

Disconnect device from power source and power down.

1024

Step 2

  • With the device turned upside down, use your index fingers to push the battery latches in towards each other.

With the device turned upside down, use your index fingers to push the battery latches in towards each other.

Step 3

  • The latch on your left will stay at the inward position, while the latch on the right will slide back out.
  • Gently grasp the battery and pull it back away from the device and yourself.

The latch on your left will stay at the inward position, while the latch on the right will slide back out.

Gently grasp the battery and pull it back away from the device and yourself.

Step 4

              Optical Drive
  • Close the laptop and lay it down with the bottom facing up.
  • Using a size #00 Phillips screw drive remove the screw holding in the optical drive.

Close the laptop and lay it down with the bottom facing up.

Using a size #00 Phillips screw drive remove the screw holding in the optical drive.

Step 5

  • Grip the optical drive and gently pull it out.

Grip the optical drive and gently pull it out.

Step 6

              Wireless Card
  • Remove the 11 screws holding the body of the laptop together with a size #00 Phillips screwdriver.

Remove the 11 screws holding the body of the laptop together with a size #00 Phillips screwdriver.

Step 7

  • Using the spudger, push in the tabs in the back that hold the body together. Carefully pry the body apart by working the spudger around the body.

Using the spudger, push in the tabs in the back that hold the body together. Carefully pry the body apart by working the spudger around the body.

Step 8

  • Using the spudger, carefully pry the wire connecting the wireless card to the motherboard off of it.

Using the spudger, carefully pry the wire connecting the wireless card to the motherboard off of it.

Step 9

  • Using the size #00 Phillips screwdriver remove the single screw holding it in place.

Using the size #00 Phillips screwdriver remove the single screw holding it in place.

Step 10

  • carefully pull the card of its slot.

carefully pull the card of its slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Drake Scoville

Member since: 09/21/2017

533 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Washington State, Team S1-G4, Phelps-Hillen Fall 2017                        

                                                  Member of Washington State, Team S1-G4, Phelps-Hillen Fall 2017 



                    WSU-PHELPS-HILLEN-F17S1G4                     


                                            6 Members                     


                                            7 Guides authored