Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • Screen
  • 3 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP 15-ac142dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen
  • The first step you should take is to turn the laptop off.
  • Next you want to get the prying tool and wedge it into the seam of the screen and outer casing.

The first step you should take is to turn the laptop off.

Next you want to get the prying tool and wedge it into the seam of the screen and outer casing.

1024

Step 2

  • Once it is wedged in on one of the upper corners you want to gently lift and slide the tool down the sides and top of the seam until the frame pops off.
  • Continue moving the tool down, while wedged, to release the grasp. You will be left with just the screen in the casing.
  • While prying off make sure you have a good grasp on the computer. You will know it is coming off due to the audible clicks

Once it is wedged in on one of the upper corners you want to gently lift and slide the tool down the sides and top of the seam until the frame pops off.

Continue moving the tool down, while wedged, to release the grasp. You will be left with just the screen in the casing.

While prying off make sure you have a good grasp on the computer. You will know it is coming off due to the audible clicks

Step 3

  • Next, you will want to unscrew the Phillips PM2.0×5.2 screws at the top of the screen with the #0 bit, this will allow the screen to pop off easily.
  • Once all the screws are removed, gently remove the screen from the outer casing.

Next, you will want to unscrew the Phillips PM2.0×5.2 screws at the top of the screen with the #0 bit, this will allow the screen to pop off easily.

Once all the screws are removed, gently remove the screen from the outer casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Nicole Mathieu

Member since: 03/19/2018

620 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S2-G4, Bernier Spring 2018                        

                                                  Member of UMass Dartmouth, Team S2-G4, Bernier Spring 2018 



                    UMASSD-BERNIER-S18S2G4                     


                                            3 Members                     


                                            5 Guides authored