Difficulty

Moderate

Steps

7

Time Required

                          30 - 45 minutes

Sections

3

  • Battery
  • 1 step
  • Back Panel
  • 2 steps
  • Motherboard
  • 4 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackHP 14-am052nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop over to its bottom so that the backside is facing you.
  • Using your fingers, push the two locking tabs inwards to release the battery.
  • Remove the battery from the device.

Turn the laptop over to its bottom so that the backside is facing you.

Using your fingers, push the two locking tabs inwards to release the battery.

Remove the battery from the device.

1024

Step 2

              Back Panel
  • After removing the battery with the laptop on its back, expose screws that are hidden under the rubber feet and the center label.
  • Using the Phillips #0 screwdriver, remove fourteen (14) 6 mm screws from the back panel.

After removing the battery with the laptop on its back, expose screws that are hidden under the rubber feet and the center label.

Using the Phillips #0 screwdriver, remove fourteen (14) 6 mm screws from the back panel.

Step 3

  • Use a prying tool to remove the back panel from the base of the computer.

Use a prying tool to remove the back panel from the base of the computer.

Step 4

              Motherboard
  • Using the Phillips #0 screwdriver, remove three 3 mm screws and five 3.5 mm screws from the motherboard.

Using the Phillips #0 screwdriver, remove three 3 mm screws and five 3.5 mm screws from the motherboard.

Step 5

  • Using the Phillips #0 screwdriver, remove four 1.5 mm screws from the silver cover.
  • Remove the silver cover from the device.

Using the Phillips #0 screwdriver, remove four 1.5 mm screws from the silver cover.

Remove the silver cover from the device.

Step 6

  • Unplug all connectors attached to the motherboard.

Unplug all connectors attached to the motherboard.

Step 7

  • Once all plugs and screws disconnected, remove the motherboard from the device.

Once all plugs and screws disconnected, remove the motherboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Matthew Heather

Member since: 11/03/2021

379 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 3-3, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 3-3, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S3G3                     


                                            3 Members                     


                                            7 Guides authored