Difficulty

Easy

Steps

6

Time Required

                          10 - 20 minutes

Sections

1

  • How to Stabilize the Stem of a Longwise ES06 E-Scooter
  • 6 steps

Flags

0

  • BackE-Scooter

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide focus on stabilizing the stem/handle of the scooter, restoring the full function of the electric scooter. Riding a scooter with a shaky stem can be dangerous to the rider and passersby because there’s a greater chance of losing control if your scooter is loose at the stem.

Before beginning this guide, turn off the e-scooter and unplug it from the charger.

What you need

Step 1

              How to Stabilize the Stem of a Longwise ES06 E-Scooter
  • Power off your E-Scooter and make sure it is not charging.

Power off your E-Scooter and make sure it is not charging.

1024

Step 2

  • Slide the locking clip out from the base of the stem.
  • Unlock the clamp on the stem.

Slide the locking clip out from the base of the stem.

Unlock the clamp on the stem.

Step 3

  • Gently lower the stem onto the back wheel and keep it stable.

Gently lower the stem onto the back wheel and keep it stable.

Step 4

  • Using an adjustable wrench, carefully tighten the bolt at the base of the stem.
  • This will make the stem stable.
  • Do not use the wrench on the spring between the stem and the bolt as it may damage the wires beneath.

Using an adjustable wrench, carefully tighten the bolt at the base of the stem.

This will make the stem stable.

Do not use the wrench on the spring between the stem and the bolt as it may damage the wires beneath.

Step 5

  • Using a slotted/flathead screwdriver, carefully tighten the screw on the clamp.
  • This will prevent the clamp from popping open.

Using a slotted/flathead screwdriver, carefully tighten the screw on the clamp.

This will prevent the clamp from popping open.

Step 6

  • Use a Phillips #0 to tighten the screw on the locking clip.
  • This helps the clamp to stay in place and prevent it from popping open.

Use a Phillips #0 to tighten the screw on the locking clip.

This helps the clamp to stay in place and prevent it from popping open.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Maithili Admane

Member since: 09/24/2022

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team B-3, Allen Fall 2022                        

                                                  Member of York University, Team B-3, Allen Fall 2022 



                    YORK-ALLEN-F22SBG3                     


                                            2 Members                     


                                            1 Guide authored