How To Rewire A Nostalgia Electrics Pcm805 Repair Guide

Difficulty

Difficult

Steps

Time Required

                          15 - 30 minutes

Sections

Nostalgia Electrics PCM805 Wiring Teardown
2 steps
How to rewire a Nostalgia Electrics PCM805
2 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackNostalgia Electrics PCM805
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Nostalgia Electrics PCM805 Wiring Teardown

Locate the tie strap holding the wires and cut with a pair of scissors.
Use care not to snip the wires.

Locate the tie strap holding the wires and cut with a pair of scissors.

Use care not to snip the wires.

1024

Step 2

Make note of the wiring arrangement of each bundle before this step.
Using wire cutters, cut each wire as close to the wire connector as possible.
Cut the wires in both bundles.
To reassemble the cotton candy maker after cutting the wires, follow our rewiring guide.

Make note of the wiring arrangement of each bundle before this step.

Using wire cutters, cut each wire as close to the wire connector as possible.

Cut the wires in both bundles.

To reassemble the cotton candy maker after cutting the wires, follow our rewiring guide.

Step 3

              How to rewire a Nostalgia Electrics PCM805

Using the wire stripper, remove 1/2 inch of the wire insulation at the end of each wire to expose the bare wire for re-connection.

Using the wire stripper, remove 1/2 inch of the wire insulation at the end of each wire to expose the bare wire for re-connection.

Step 4

Twist the exposed ends of the wires so that they stay together.
Push the wire cap onto the exposed ends while holding the wires and twist in a clock-wise direction until it is tight.
Repeat this process for both bundles of wires.
Do not attempt to power on the device without the wire caps on or mix wires between the bundles.

Twist the exposed ends of the wires so that they stay together.

Push the wire cap onto the exposed ends while holding the wires and twist in a clock-wise direction until it is tight.

Repeat this process for both bundles of wires.

Do not attempt to power on the device without the wire caps on or mix wires between the bundles.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Carlton

Member since: 01/13/2015

660 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 3-5, Hickman Winter 2015                        

                                                  Member of USF Tampa, Team 3-5, Hickman Winter 2015 



                    USFT-HICKMAN-W15S3G5                     


                                            5 Members                     


                                            8 Guides authored

Izzy - Sep 29, 2019

DO NOT TRY THIS..it broke my machine TO NOT TRY THIS

Better Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Better Introduction

What you need

Team