Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- How to Replace the Suction Cups for the Anti-Clamp
- 3 steps
Flags
0
BackElectronics Skills
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Suction cup information
- The suction cups are secured to the clamp by friction-fit pins.
- To remove the pins, you have to push them through their indents in the clamp’s arms.
The suction cups are secured to the clamp by friction-fit pins.
To remove the pins, you have to push them through their indents in the clamp’s arms.
1024
Step 2
Remove the suction cups
- Rotate the suction cup towards the indentation in the clamp’s arm to release the pin.
- You may need to use significant force and another hand to support the Anti-Clamp.
- Remove the suction cup and its pin.
- During reassembly, angle the pin into the hole across from the indent before pushing it back into the arm.
Rotate the suction cup towards the indentation in the clamp’s arm to release the pin.
You may need to use significant force and another hand to support the Anti-Clamp.
Remove the suction cup and its pin.
During reassembly, angle the pin into the hole across from the indent before pushing it back into the arm.
Step 3
Remove the pin
- Pull the pin through the top of the suction cup and remove it.
Pull the pin through the top of the suction cup and remove it.
To reassemble your device, follow these instructions in reverse order.
For other general electronics skills guides, click here.
Cancel: I did not complete this guide.
Author
Alex Diaz-Kokaisl
Member since: 01/16/2022
58,262 Reputation
300 Guides authored
Badges:
30
+27 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored