Difficulty

Moderate

Steps

8

Time Required

                          30 - 45 minutes

Sections

1

  • Scott Mountain Bike Handlebars
  • 8 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackScott

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Scott Mountain Bike Handlebars
  • Prop bike upright
  • Unscrew the hex bolts holding the front and rear shifter in place.
  • Use the H4 size hex wrench
  • Repeat for other side of handlebars.

Prop bike upright

Unscrew the hex bolts holding the front and rear shifter in place.

Use the H4 size hex wrench

Repeat for other side of handlebars.

1024

Step 2

  • Slide the shifters toward the center of the handlebars so there is a gap between them and the grips.
  • Repeat for other side of handlebars.

Slide the shifters toward the center of the handlebars so there is a gap between them and the grips.

Step 3

  • Use a flathead screwdriver to wedge a gap between the grip and the handlebars.
  • Twist grip around until it comes off of handlebar.
  • Repeat for other side of handlebars.

Use a flathead screwdriver to wedge a gap between the grip and the handlebars.

Twist grip around until it comes off of handlebar.

Step 4

  • Slide the shifters off of the end of the handlebars.
  • Let them hang on the bike.
  • Repeat for other side of handlebars.

Slide the shifters off of the end of the handlebars.

Let them hang on the bike.

Step 5

  • Unscrew the hex bolts holding the center bracket in place.
  • Use H3 hex wrench.
  • Place center bracket and hex screws off to the side. They will be needed in the next step.

Unscrew the hex bolts holding the center bracket in place.

Use H3 hex wrench.

Place center bracket and hex screws off to the side. They will be needed in the next step.

Step 6

  • Attach new handlebars and screw the center bracket back in place.
  • Make sure that handlebars are centered.

Attach new handlebars and screw the center bracket back in place.

Make sure that handlebars are centered.

Step 7

  • Slide the shifters back onto the handlebars so that the numbers are upright.
  • Do not screw them back in place yet.

Slide the shifters back onto the handlebars so that the numbers are upright.

Do not screw them back in place yet.

Step 8

  • Slide the handlebar grips back onto the ends of the handlebars.
  • Slide the shifters back against the grips and screw them into place.

Slide the handlebar grips back onto the ends of the handlebars.

Slide the shifters back against the grips and screw them into place.

By following these steps, you will have your bike ready in no time.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Sean Slater

Member since: 02/24/2015

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team 23-3, Green Winter 2015                        

                                                  Member of Cal Poly, Team 23-3, Green Winter 2015 



                    CPSU-GREEN-W15S23G3                     


                                            6 Members                     


                                            13 Guides authored