How To Replace Burners On Weber Genesis Ii Grill Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 20 minutes

Sections

Burners
5 steps

Flags

BackBarbecue Grill
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Before beginning this guide, make sure that your grill is completely turned off and that you have room to take apart the grill, as this guide could be difficult in a cramped space.

In step 5, you will be removing the ignition device from the burner using a metal wedge. The ignition device is connected to the grill by a wire, so take special care to not strip or damage the wire while removing the device.

What you need

Step 1

              Burners

This is the Weber Genesis II grill. Before replacement of the burner, we will start by cleaning the grates with a grill brush in order to be clean and safe.
Make sure that the grill is completely turned off so there is no chance of accidental burn.

This is the Weber Genesis II grill. Before replacement of the burner, we will start by cleaning the grates with a grill brush in order to be clean and safe.

Make sure that the grill is completely turned off so there is no chance of accidental burn.

1024

Step 2

Remove the grates using your hands.
Grab on each side of the grill grate with your hands and lift straight upwards.
Set the removed grate off to the side of the grill.
Repeat this procedure for all three of the grates on top of the grill.

Remove the grates using your hands.

Grab on each side of the grill grate with your hands and lift straight upwards.

Set the removed grate off to the side of the grill.

Repeat this procedure for all three of the grates on top of the grill.

Step 3

Remove the heat deflector plates from on top of the burners.
Grab each deflector plate and pull straight upwards as with the grates.
Place the removed heat deflector plates off to the side of the grill.
Repeat this procedure for all heat deflector plates until each burner is exposed.
Only half of the heat deflectors plates will have burners underneath them. So do not be alarmed when not all plates have a burner.

Remove the heat deflector plates from on top of the burners.

Grab each deflector plate and pull straight upwards as with the grates.

Place the removed heat deflector plates off to the side of the grill.

Repeat this procedure for all heat deflector plates until each burner is exposed.

Only half of the heat deflectors plates will have burners underneath them. So do not be alarmed when not all plates have a burner.

Step 4

Remove the burner from its slot in the back of the grill.
With both hands, carefully pull the burner upwards and slightly to the left in order to pull it out of its slot.
The burners can become stuck and require a little extra force to pull out, but do not pull too hard and hit the top of the grill or yourself.
If replacing all burners, repeat this procedure to remove all burners from their slots.

Remove the burner from its slot in the back of the grill.

With both hands, carefully pull the burner upwards and slightly to the left in order to pull it out of its slot.

The burners can become stuck and require a little extra force to pull out, but do not pull too hard and hit the top of the grill or yourself.

If replacing all burners, repeat this procedure to remove all burners from their slots.

Step 5

Detach the burner from the ignition device.
With a small wedge, such as a flat-head screwdriver, unclip the white connector from the burner.
With the ignition device removed, you are now all set to replace the burner with a new one.

Detach the burner from the ignition device.

With a small wedge, such as a flat-head screwdriver, unclip the white connector from the burner.

With the ignition device removed, you are now all set to replace the burner with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Nicholas Brown

Member since: 03/24/2021

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team S1-G3, Riel Spring 2021                        

                                                  Member of UMass Dartmouth, Team S1-G3, Riel Spring 2021 



                    UMASSD-RIEL-S21S1G3                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team