Difficulty

Moderate

Steps

5

Time Required

                          20 - 25 minutes

Sections

1

  • Compressor Start Device
  • 5 steps

Flags

0

  • BackWhirlpool Refrigerator

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Compressor Start Device
  • Remove all items from the fridge if possible.
  • Unplug the fridge from the wall outlet.
  • You may need to slide the fridge out from its spot in your kitchen to reach the plug. Be sure to have a friend help you move the fridge if it is very heavy.

Remove all items from the fridge if possible.

Unplug the fridge from the wall outlet.

You may need to slide the fridge out from its spot in your kitchen to reach the plug. Be sure to have a friend help you move the fridge if it is very heavy.

1024

Step 2

  • Remove the ten screws from the rear panel with a Square Head #0 screwdriver.

Remove the ten screws from the rear panel with a Square Head #0 screwdriver.

Step 3

  • Remove the rear panel.
  • Pull the power cord up while removing the rear panel.
  • Once you remove the rear panel everything will usually be dusty. Use a vacuum or broom to remove the dust if necessary.
  • Remove the clip from the top of the compressor start device using the needle nose pliars.

Remove the rear panel.

Pull the power cord up while removing the rear panel.

Once you remove the rear panel everything will usually be dusty. Use a vacuum or broom to remove the dust if necessary.

Remove the clip from the top of the compressor start device using the needle nose pliars.

Step 4

  • Remove the old compressor start device by unplugging it from the compressor.

Remove the old compressor start device by unplugging it from the compressor.

Step 5

  • Put in the new compressor start device.
  • Resemble your new compressor start device and make sure that it is secure.
  • Connect your new compressor start device to the locking tab.

Put in the new compressor start device.

Resemble your new compressor start device and make sure that it is secure.

Connect your new compressor start device to the locking tab.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Mohamed Mohamoud

Member since: 09/20/2020

219 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       York University, Team S1-G88, Woodhouse Fall 2020                        

                                                  Member of York University, Team S1-G88, Woodhouse Fall 2020 



                    YORK-WOODHOUSE-F20S1G88                     


                                            1 Member                     


                                            1 Guide authored