How To Repair The Electrical Connections On A Little Tikes Motorized Bubble Mower Repair Guide

Difficulty

Easy

Steps

13

Time Required

                          15 - 20 minutes            

Sections

1

• How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.
• 13 steps

Flags

0

• BackToy

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.               

• Start with a flat, open space to work.

Start with a flat, open space to work.

1024

Step 2

• Unscrew these three 1.2 mm screws.

Unscrew these three 1.2 mm screws.

Step 3

• Remove the Bubble Sprocket from the motor.

Remove the Bubble Sprocket from the motor.

Step 4

• Unscrew these four 1.2mm screws holding the plate on.

Unscrew these four 1.2mm screws holding the plate on.

Step 5

• Remove the plate.

Remove the plate.

Step 6

• Connect the red wire to the top right pin.

Connect the red wire to the top right pin.

Step 7

• Solder the Red wire to the metal pin.
• (Warning Soldering is very hot!)

Solder the Red wire to the metal pin.

(Warning Soldering is very hot!)

Step 8

• Connect the yellow wire to the bottom right pin.
• Solder the yellow wire to the bottom right pin.
• (Warning Soldering iron is very hot!)

Connect the yellow wire to the bottom right pin.

Solder the yellow wire to the bottom right pin.

(Warning Soldering iron is very hot!)

Step 9

• Replace the plate over the wires.

Replace the plate over the wires.

Step 10

• Put four 1.2 mm screws for the plate back into place.

Put four 1.2 mm screws for the plate back into place.

Step 11

• Put three 1.2mm screws for the motor back into place.

Put three 1.2mm screws for the motor back into place.

Step 12

• Insert the Bubble sprocket onto the motor.

Insert the Bubble sprocket onto the motor.

Step 13

• You are now finished!

You are now finished!

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    John Hiller                     

Member since: 10/05/2015

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Colorado Springs, Team 7-5, Mcmichael Fall 2015                        

                                                  Member of Colorado Springs, Team 7-5, Mcmichael Fall 2015 



                    UCCS-MCMICHAEL-F15S7G5                     


                                            1 Member                     


                                            1 Guide authored