Difficulty
Easy
Steps
11
Time Required
1 - 2 hours
Sections
1
- How to Repair a Loose Impress Mighty Mite Fan
- 11 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackFan
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Make sure the fan is not connected to the power before commencing this procedure.
What you need
Step 1
How to Repair a Loose Impress Mighty Mite Fan
- Remove the single 0.8 mm screw using a Phillips #2 screwdriver. Use a pair of pliers to hold the hexagon nut so that it makes the process easier.
Remove the single 0.8 mm screw using a Phillips #2 screwdriver. Use a pair of pliers to hold the hexagon nut so that it makes the process easier.
1024
Step 2
- Disconnect the hinges that hold the fan covers together.
Disconnect the hinges that hold the fan covers together.
Step 3
- Remove the front cover and set it aside.
Remove the front cover and set it aside.
Step 4
- Use the Phillips #2 screwdriver to remove the 1.4 mm screw that holds the fan blades to the fan.
Use the Phillips #2 screwdriver to remove the 1.4 mm screw that holds the fan blades to the fan.
Step 5
- Remove the fan blades and set them aside.
Remove the fan blades and set them aside.
Step 6
- Position the fans back cover correctly aligned with its placeholders.
- The placeholders are small and black which are not too visible on camera. There are two placeholders and they are shaped like cylinders.
Position the fans back cover correctly aligned with its placeholders.
The placeholders are small and black which are not too visible on camera. There are two placeholders and they are shaped like cylinders.
Step 7
- Twist the big knob clockwise, that holds the back cover, until it is tight and you can no longer twist.
- The back cover must be correctly placed on its holders before this step.
Twist the big knob clockwise, that holds the back cover, until it is tight and you can no longer twist.
The back cover must be correctly placed on its holders before this step.
Step 8
- Place the fan blades back onto the fan and start screwing the 1.4 mm cross head screw into the clockwise direction until it is flat and can no longer screw.
Place the fan blades back onto the fan and start screwing the 1.4 mm cross head screw into the clockwise direction until it is flat and can no longer screw.
Step 9
- Place the front cover back onto the fan with the punch-holes aligned so that the small bolt can go through.
- These punch-holes should be aligned and you should be able to see through it.
Place the front cover back onto the fan with the punch-holes aligned so that the small bolt can go through.
These punch-holes should be aligned and you should be able to see through it.
Step 10
- Place the .8 mm cross head screw back inside the punch-hole and start screwing the hexagon nut by hand so that this process is easier.
- Do not tighten this too much as you might need to repeat the whole process in the future of your fans usage.
Place the .8 mm cross head screw back inside the punch-hole and start screwing the hexagon nut by hand so that this process is easier.
Do not tighten this too much as you might need to repeat the whole process in the future of your fans usage.
Step 11
- Close the hinges so that the covers are joined back together.
Close the hinges so that the covers are joined back together.
To repeat the process start from step 1.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Alexis S
Member since: 10/05/2021
193 Reputation
1 Guide authored
Badges:
3
Team
CSU Los Angeles, Team 11-20, Grodsky Fall 2021
Member of CSU Los Angeles, Team 11-20, Grodsky Fall 2021
CSULA-GRODSKY-F21S11G20
1 Member
1 Guide authored
