Difficulty
Moderate
Steps
13
Time Required
10 - 15 minutes
Sections
1
- Cotton Winter Gloves
- 13 steps
Flags
0
BackAccessory
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Then this will be a great guide to follow. This guide will teach you how to fix your gloves with a needle and thread by hand sewing.
Follow the instructions below to restore your winter gloves.
What you need
Step 1
Cotton Winter Gloves
- Find the hole in your glove.
Find the hole in your glove.
1024
Step 2
- Using sewing scissors, cut away any loose thread or frayed sections.
- Removing loose thread or frayed sections will help the sewing process be easier.
Using sewing scissors, cut away any loose thread or frayed sections.
Removing loose thread or frayed sections will help the sewing process be easier.
Step 3
- Turn the glove inside out.
- When the glove is turned inside out, it will ensure that the stitching from the repair won’t be seen on the outside.
Turn the glove inside out.
When the glove is turned inside out, it will ensure that the stitching from the repair won’t be seen on the outside.
Step 4
- Cut about 24 inches of thread with a color that matches your gloves.
Cut about 24 inches of thread with a color that matches your gloves.
Step 5
- Hold the needle with your thumb and index finger.
- Insert one end of the thread into the eye of the needle.
- Pull the thread through the needle about halfway.
- Working with sewing needles can potentially result in a minor injury.
Hold the needle with your thumb and index finger.
Insert one end of the thread into the eye of the needle.
Pull the thread through the needle about halfway.
Working with sewing needles can potentially result in a minor injury.
Step 6
- Find both ends of the thread.
- Line the ends of the thread together.
- Create a knot at the end of the thread.
Find both ends of the thread.
Line the ends of the thread together.
Create a knot at the end of the thread.
Step 7
- Using your dominant hand, insert the needle as close to the edge of the hole as possible.
- Pull the needle and all of the thread through the glove.
Using your dominant hand, insert the needle as close to the edge of the hole as possible.
Pull the needle and all of the thread through the glove.
Step 8
- Thread the needle to the other side of the glove to create a straight stitch.
- Repeat steps 7 and 8 until you reach the other end of the hole.
- How to Sew a Straight Stitch
Thread the needle to the other side of the glove to create a straight stitch.
Repeat steps 7 and 8 until you reach the other end of the hole.
How to Sew a Straight Stitch
Step 9
- Insert 3/4 of the needle into the glove.
Insert 3/4 of the needle into the glove.
Step 10
- Wrap the thread around the needle 3 times.
Wrap the thread around the needle 3 times.
Step 11
- Pull the needle and thread through to make a knot.
Pull the needle and thread through to make a knot.
Step 12
- Cut the excess thread off.
Cut the excess thread off.
Step 13
- Turn the glove around and wear the glove!
Turn the glove around and wear the glove!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Jessie Li
Member since: 02/21/2022
247 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
University of North Texas, Team 1-9, Smith Spring 2022
Member of University of North Texas, Team 1-9, Smith Spring 2022
UNT-SMITH-S22S1G9
1 Member
1 Guide authored
