Difficulty

Moderate

Steps

11

Time Required

                          25 minutes

Sections

1

  • How to Repair a Crack on a Vittorazi Moster Exhaust
  • 11 steps

Flags

0

  • BackVittorazi Moster 185 Plus MY19

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              How to Repair a Crack on a Vittorazi Moster Exhaust
  • Use a 10mm open wrench to lossen the three exhaust mounting points.

Use a 10mm open wrench to lossen the three exhaust mounting points.

1024

Step 2

  • Locate the nuts that need to be adjusted and make sure you you have the proper tools, stated earlier to ensure they can loosen.

Locate the nuts that need to be adjusted and make sure you you have the proper tools, stated earlier to ensure they can loosen.

Step 3

  • Once you have found the nuts, use your 10mm wrench to carefully unscrew and loosen the nuts.

Once you have found the nuts, use your 10mm wrench to carefully unscrew and loosen the nuts.

Step 4

  • This may take some extra force to loosen the nuts, and if this is case, keep in mind all safety precautions.

This may take some extra force to loosen the nuts, and if this is case, keep in mind all safety precautions.

Step 5

  • Remove with the 10mm wrench the two nuts in the exhaust base.

Remove with the 10mm wrench the two nuts in the exhaust base.

Step 6

  • Remove the loosen mounts and take out the exhaust with it’s base.

Remove the loosen mounts and take out the exhaust with it’s base.

Step 7

  • Clean the cracked area with alcohol and a rug.

Clean the cracked area with alcohol and a rug.

Step 8

  • Grind the cracked area with the grinder.

Grind the cracked area with the grinder.

Step 9

  • Weld the cracked area with the welder.

Weld the cracked area with the welder.

Step 10

  • Grind the welded area with the grinder to smooth the area.

Grind the welded area with the grinder to smooth the area.

Step 11

  • Reinstall the exhaust to the motor by repeating 1-3 steps in reverse order.

Reinstall the exhaust to the motor by repeating 1-3 steps in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Darrell Gonzalez

Member since: 09/20/2021

207 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of Puerto Rico Mayagüez, Team 2-19, Cools Stephens Fall 2021                        

                                                  Member of University of Puerto Rico Mayagüez, Team 2-19, Cools Stephens Fall 2021 



                    UPRM-COOLS STEPHENS-F21S2G19                     


                                            1 Member                     


                                            1 Guide authored