How To Open The Huawei Watch Gt 2 46 Mm Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

• How to open the Huawei Watch GT 2 (46 mm)
• 5 steps

Flags

0

• BackHuawei Watch GT 2 (46 mm)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the watch band               

• Before starting repairs, take your watch off the charger and power it down.
• Remove the watch band.

Before starting repairs, take your watch off the charger and power it down.

Remove the watch band.

1024

Step 2

              Unfasten the screws               

• Remove the four 3.7 mm-long Torx T2 screws.

Remove the four 3.7 mm-long Torx T2 screws.

Step 3

              Insert a spudger               

• Insert the edge of a spudger into the middle loudspeaker opening at the top edge of your watch.

Insert the edge of a spudger into the middle loudspeaker opening at the top edge of your watch.

Step 4

              Pry up the back cover assembly               

• The plastic clamps holding the back cover in place sit very tight and may require some force during the prying procedure.
• Use the spudger to pry up the back cover assembly of your Huawei watch GT 2.
• Don’t try to remove the back cover assembly all the way yet, it’s still connected to the motherboard.

The plastic clamps holding the back cover in place sit very tight and may require some force during the prying procedure.

Use the spudger to pry up the back cover assembly of your Huawei watch GT 2.

Don’t try to remove the back cover assembly all the way yet, it’s still connected to the motherboard.

Step 5

• Carefully swing the back cover assembly open to an upward position.

Carefully swing the back cover assembly open to an upward position.

To reassemble your Huawei Watch GT 2 (46 mm), follow these instructions in reverse order.

Opening didn’t go as planned? Check out our Answers community for troubleshooting help.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                    Dominik Schnabelrauch                     

Member since: 11/23/2016

158,135 Reputation

                                      649 Guides authored                  



                       Badges:
                       40







                                                        +37 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored                     

Tamás Schmidt - Jul 11, 2022

Reply

How can i change the battery Watch GT2 (46mm)?

Thanks for the reply!

Dominik Schnabelrauch - Jul 12, 2022

Hi Tamás,

the battery of the Huawei Watch GT2 is soldered to the bottom assembly cable. To replace it you’re required to execute some very difficult micro soldering. The risk of damaging surrounding components is very high during that procedure.

Plewu Gracz - Aug 7, 2022

Reply

hello, did you happened to replace only glass of smartwatch ?? is it posible ?? my oled and touch is working fine, but after glass unglued at corners somehow, my glass got broken. I have found that you can buy only glass for this watch.

Elmien Elmien Werner - Jan 5, 2023

Reply

My screen got water in and now the touch screen dont want to work.