Difficulty
Easy
Steps
6
Time Required
15 minutes
Sections
1
- How to open and start a Honda Insight with a flat battery
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Back2009-2014 Honda Insight
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unlock the car; open hood
- Unlock the drivers door with a key
- Check if any lights are on. Turn them off
- Open the hood
Unlock the drivers door with a key
Check if any lights are on. Turn them off
Open the hood
1024
Step 2
Check the battery
- If you have a multimeter - check the voltage on your battery. Anything above 12 is good (this means your problem is not the battery).
- If it is close to 0 it means that something is still draining on it (probably a light is on)
If you have a multimeter - check the voltage on your battery. Anything above 12 is good (this means your problem is not the battery).
If it is close to 0 it means that something is still draining on it (probably a light is on)
Step 3
Connect fresh battery or booster
- You can jump start the car by connecting it to another battery, car or booster battery (see other guide on how-to). You can also charge existing battery if you have a charger. Use any available option.
You can jump start the car by connecting it to another battery, car or booster battery (see other guide on how-to). You can also charge existing battery if you have a charger. Use any available option.
Step 4
Disable alarm (optional)
- Once you connect the power the alarm may go off (depending on how you opened the car)
- To disable alarm, before you put a key into ignition, lock and close all doors and unlock it with a key from the outside. This should stop the alarm.
- If this did not work or you already have a key in ignition you can disable the horn by removing the corresponding fuse (see pic which one). There is also a tool for removal in the compartment
Once you connect the power the alarm may go off (depending on how you opened the car)
To disable alarm, before you put a key into ignition, lock and close all doors and unlock it with a key from the outside. This should stop the alarm.
If this did not work or you already have a key in ignition you can disable the horn by removing the corresponding fuse (see pic which one). There is also a tool for removal in the compartment
Step 5
Unlock gearbox [optional]
- Additionally it may happen that the gearbox is stuck and does not allow you to move it
- For this there is a unlocking mechanism under a cap, from the right side.
- Pull it up using a plastic card or something similar
- Then push down on the middle part (eg. with a key)
Additionally it may happen that the gearbox is stuck and does not allow you to move it
For this there is a unlocking mechanism under a cap, from the right side.
Pull it up using a plastic card or something similar
Then push down on the middle part (eg. with a key)
Step 6
Close everything and drive carefully
- if you used a boost you want to drive for at least 30 minutes for your battery to pick up some charge
- use the gearbox in ‘S’ position for this drive - it disables the engine start/stop feature and also keeps the revs higher, thus the battery will charge faster.
- Check again if you have left any missing ligts on which may have drained your battery
- If you find the battery flat again, and no light have been left on - show your car to a mechanic. You may either have a dead battery or problem wth a charging circuit.
- Punch your code into the radio to unlock it (simply press numbers 1-6 in secuence). Code is 5 digits long.
if you used a boost you want to drive for at least 30 minutes for your battery to pick up some charge
use the gearbox in ‘S’ position for this drive - it disables the engine start/stop feature and also keeps the revs higher, thus the battery will charge faster.
Check again if you have left any missing ligts on which may have drained your battery
If you find the battery flat again, and no light have been left on - show your car to a mechanic. You may either have a dead battery or problem wth a charging circuit.
Punch your code into the radio to unlock it (simply press numbers 1-6 in secuence). Code is 5 digits long.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Paul
Member since: 05/10/2018
138 Reputation
1 Guide authored
Badges:
4
+1 more badge
Miraj Khan - Apr 30, 2020
Reply
Hello I have honda insight 2011 My car doors can’t be unlocked with its key remote. I even changed the battery for the remote but still same problem. So might be the car battery itself which might be dead or low as I cahnged it 4 years ago but how can I open the bonnet to change or check the battery without having access inside my car . Can you tell me where is spot in my car to use my key to open the door