Difficulty

Moderate

Steps

6

Time Required

                          1 hour

Sections

1

  • Truck OEM Halogen Bulbs Cab Roof Marker Lights
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackCar and Truck

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the truck interior front map lamps
  • There are a couple ways you can power up this LED. You have the choice of adding a switch or just using the truck’s interior light switch. For demonstration purposes, we are using the truck’s interior lights to power up the entire assembly.
  • Expose the wires by removing the entire front map light assembly.

There are a couple ways you can power up this LED. You have the choice of adding a switch or just using the truck’s interior light switch. For demonstration purposes, we are using the truck’s interior lights to power up the entire assembly.

Expose the wires by removing the entire front map light assembly.

1024

Step 2

              Do the measurement on the cab roof
  • Get up to the roof of your truck to measure where you’re going to install these LED cab roof lights. You can use a dry erase marker to mark all the points where you will be drilling into the roof.

Get up to the roof of your truck to measure where you’re going to install these LED cab roof lights. You can use a dry erase marker to mark all the points where you will be drilling into the roof.

Step 3

              Drill holes

Step 4

              Mount the LED cab roof lamps
  • Use a screwdriver and attach the screws at the front and the rear of each LED roof lamp to permanently mount it.

Use a screwdriver and attach the screws at the front and the rear of each LED roof lamp to permanently mount it.

Step 5

              Wiring
  • Wire up the LED lights in parallel. Use some electrical tape to secure the connections. Route the wires through the front map light assembly to complete the wiring portion.

Wire up the LED lights in parallel. Use some electrical tape to secure the connections. Route the wires through the front map light assembly to complete the wiring portion.

Step 6

              Enjoy your new LED cab roof marker lights
  • Test everything and enjoy your new LED cab roof light.

Test everything and enjoy your new LED cab roof light.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Eric Wu

Member since: 01/21/2015

3,267 Reputation

                                      23 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Luke - Apr 26, 2016

Reply

When you route the wires through the front map assembly, how exactly do you hook up the wires to the exposed map lights