Difficulty
Very easy
Steps
3
Time Required
1 - 5 minutes
Sections
1
- How to Install a 2.5" SSD Into a Silicone Enclosure
- 3 steps
Flags
0
BackElectronics Skills
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Insert the SSD into the enclosure
- Before you insert the new hard drive, note the orientation of the SATA connectors embedded in the enclosure:
- The wide power SATA port
- The narrower data SATA port
Before you insert the new hard drive, note the orientation of the SATA connectors embedded in the enclosure:
The wide power SATA port
The narrower data SATA port
1024
Step 2
- Using the previous step, orient the new drive so that its SATA connectors will align with the enclosure’s.
- Slide the drive into the enclosure’s opening.
- Push the drive into the enclosure until it stops sliding and the SATA connectors are completely seated.
Using the previous step, orient the new drive so that its SATA connectors will align with the enclosure’s.
Slide the drive into the enclosure’s opening.
Push the drive into the enclosure until it stops sliding and the SATA connectors are completely seated.
Step 3
- Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive.
Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive.
Your drive is ready to be used!
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Arthur Shi
Member since: 01/03/2018
211,868 Reputation
442 Guides authored
Badges:
46
+43 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored