Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal
  • 3 steps
  • Motor
  • 2 steps
  • How to grease the Lite FX Rotating Big Ball of Lite Model 1929 gears
  • 2 steps

Flags

1

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

  • BackLite FX Rotating Big Ball of Lite Model 1929

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal
  • Turn the device over so that the base is on top.

Turn the device over so that the base is on top.

1024

Step 2

  • Peel off the piece of metal that is glued to hold the two halves of the base together.
  • You may need rubber cement to reapply the piece of metal when reassembling the device.

Peel off the piece of metal that is glued to hold the two halves of the base together.

You may need rubber cement to reapply the piece of metal when reassembling the device.

Step 3

  • Unscrew the four 10mm Phillips head screws on the bottom of the device.
  • Once the base is removed, the device should look as shown on the picture.

Unscrew the four 10mm Phillips head screws on the bottom of the device.

Once the base is removed, the device should look as shown on the picture.

Step 4

              Motor
  • Use a pair of tweezers to crush the sides of the wirenuts.
  • The wirenuts are crimped to lock the wires in place. Usually the wires are just twisted into them.
  • Pull all of the wires out of the wirenuts.

Use a pair of tweezers to crush the sides of the wirenuts.

The wirenuts are crimped to lock the wires in place. Usually the wires are just twisted into them.

Pull all of the wires out of the wirenuts.

Step 5

  • Separate the wires that belong to the motor.
  • The wires should be small and black.
  • Remove the motor.

Separate the wires that belong to the motor.

The wires should be small and black.

Remove the motor.

Step 6

              How to grease the Lite FX Rotating Big Ball of Lite Model 1929 gears
  • Unscrew the two 10 mm philips head screws.
  • Unscrew the center 14 mm philips head screw.
  • Remove the plastic piece stabilizing the gear.

Unscrew the two 10 mm philips head screws.

Unscrew the center 14 mm philips head screw.

Remove the plastic piece stabilizing the gear.

Step 7

  • Apply oil to the gear directly from the oil bottle or with a Q-tip.

Apply oil to the gear directly from the oil bottle or with a Q-tip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Nick Kaprielian

Member since: 01/14/2014

519 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 17-3, Forte Winter 2014                        

                                                  Member of Cal Poly, Team 17-3, Forte Winter 2014 



                    CPSU-FORTE-W14S17G3                     


                                            5 Members                     


                                            7 Guides authored