Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- How to Get Rid of Fan Clicking Noises on a Toshiba TDP-XP2
- 4 steps
Flags
0
BackToshiba TDP-XP2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
How to Get Rid of Fan Clicking Noises on a Toshiba TDP-XP2
- Start by removing the two screws on the bottom of the device as shown.
Start by removing the two screws on the bottom of the device as shown.
1024
Step 2
- Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.
- Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.
Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.
Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.
Step 3
- Unscrew the screws from the metal shielding to remove it.
Unscrew the screws from the metal shielding to remove it.
Step 4
- Move any wires out of the way of the fan so they won’t grind up on it during operation.
- If the cables do not stay out of the way, tape them down away from the fan.
Move any wires out of the way of the fan so they won’t grind up on it during operation.
If the cables do not stay out of the way, tape them down away from the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Bryan Underwood
Member since: 04/02/2018
697 Reputation
5 Guides authored
Badges:
3
Team
University of Memphis, Team S1-G3, Kim Spring 2018
Member of University of Memphis, Team S1-G3, Kim Spring 2018
UM-KIM-S18S1G3
3 Members
5 Guides authored
