Difficulty

Very easy

Steps

4

Time Required

                          8 - 15 minutes

Sections

1

  • How to Fix the Worx Pegasus Workbench lower tray
  • 4 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackWorx Pegasus Workbench

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Sometimes these trays become accidentally detached from each other, either partially or completely, preventing you from fully opening the bench.

Fortunately, there is an easy and permanent fix for this.

What you need

Step 1

              Re-assemble per factory
  • If yours became detached, make sure you manually re-assemble the tray as it is supposed to be

If yours became detached, make sure you manually re-assemble the tray as it is supposed to be

1024

Step 2

              Drill through the hinge
  • Drill a small hole, the smallest possible but large enough to allow a zip tie to go through. I used a 1.5mm drill bit.

Drill a small hole, the smallest possible but large enough to allow a zip tie to go through. I used a 1.5mm drill bit.

Step 3

              Route a Zip Tie
  • Route a Zip Tie through the hole you just drilled and around the hinge barrel.
  • Cut the excess with scissors or wire cutters.
  • Do this procedure on two hinges: the leftmost and rightmost.

Route a Zip Tie through the hole you just drilled and around the hinge barrel.

Cut the excess with scissors or wire cutters.

Do this procedure on two hinges: the leftmost and rightmost.

Step 4

              Enjoy your reliable workbench
  • If done correctly, the tray is not going to fail again.
  • This fix also adds a little bit more strength to the lower tray.
  • Enjoy!

If done correctly, the tray is not going to fail again.

This fix also adds a little bit more strength to the lower tray.

Enjoy!

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    RodCastler

Member since: 10/29/2022

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       2