Difficulty

Moderate

Steps

10

Time Required

                          30 minutes - 1 hour

Sections

1

  • How to Fix the Seat on a Sorrento Grey Loveseat 59928-028-1X
  • 10 steps

Flags

0

  • BackFurniture

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The sliding mechanism holds the seat in place, so that it can move when a person reclines or rock the seat. A faulty sliding mechanism will cause the seat to slip and malfunctioning will occur.

Before using this guide, inspect the loveseat for any loose components where the seat and its base connects. Typically, the sliding mechanism from the seat should be fixed to the wood of the seat. Be sure the seat base is properly secured and no components have become unattached.

Step 1 and Step 9 requires that the loveseat be turned over. If you do not feel comfortable with this step, then seek help before beginning.

Before beginning, make sure to unplug the power chord coming from the loveseat and store it in its storage unit. Locate the storage unit on back side of loveseat after unzipping the zipper.

What you need

Step 1

              How to Fix the Seat on a Sorrento Grey Loveseat 59928-028-1X
  • Turn the Sorrento Grey Loveseat over.

Turn the Sorrento Grey Loveseat over.

1024

Step 2

  • Remove the snap cover that is covering the back to show the seat’s sliding mechanism.

Remove the snap cover that is covering the back to show the seat’s sliding mechanism.

Step 3

  • Pull off the seat connected to its base by pulling the clamps on both sides outward and the seat towards your body.

Pull off the seat connected to its base by pulling the clamps on both sides outward and the seat towards your body.

Step 4

  • Align the hole of the sliding mechanism to hole on the wood of the seat.

Align the hole of the sliding mechanism to hole on the wood of the seat.

Step 5

  • Insert a screw into the hole and secure a bolt on the end.

Insert a screw into the hole and secure a bolt on the end.

Step 6

  • Use a drill and vice grips to secure the bolt on the screw.

Use a drill and vice grips to secure the bolt on the screw.

Step 7

  • Attach the seat back onto the loveseat.

Attach the seat back onto the loveseat.

Step 8

  • Use force to lock the seat into place.

Use force to lock the seat into place.

Step 9

  • Cover the sliding mechanisms with the snap cover.

Cover the sliding mechanisms with the snap cover.

Step 10

  • Guide and place the loveseat back into upright position.

Guide and place the loveseat back into upright position.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Shaquan Mayes

Member since: 09/24/2021

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Memphis, Team 50-2, Willis Fall 2021                        

                                                  Member of University of Memphis, Team 50-2, Willis Fall 2021 



                    UM-WILLIS-F21S50G2                     


                                            1 Member                     


                                            1 Guide authored