How To Fix Logitech G403 Double Click Issue Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

How to Fix Logitech G403 Double Click Issue
8 steps

Flags

BackLogitech Mouse
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Double clicking is a very common problem for G403. If your warranty is finished, you can fix the mouse by yourself, rather than buy a new one.

You will need a precision screwdriver set to fix the mouse. However, in case your screwdriver doesn’t work, you can look at these pages for help:

How to Remove a Stripped ScrewScrewdriver Best PracticesChoosing the Right Screwdriver Bit

Don’t forget to unplug your mouse before you start.

What you need

Step 1

              How to Fix Logitech G403 Double Click Issue

Use a prying tool or your hand to take out both sides of the mouse feet.

Use a prying tool or your hand to take out both sides of the mouse feet.

1024

Step 2

Use a precision screwdriver to remove four screws from the mouse.

Use a precision screwdriver to remove four screws from the mouse.

Step 3

Slowly open the mouse, and take care not to tear the ribbon cable.
Detach the cable connector.

Slowly open the mouse, and take care not to tear the ribbon cable.

Detach the cable connector.

Step 4

Remove seven screws from the upper cover.

Remove seven screws from the upper cover.

Step 5

Remove four screws from the mouse.
Remove the mouse click cover.

Remove four screws from the mouse.

Remove the mouse click cover.

Step 6

Remove the five screws attached to the mouse click switches.

Remove the five screws attached to the mouse click switches.

Step 7

Open the mouse switch using a prying tool or your hands.
Be careful not to lose the white plastic part from the mouse switch.

Open the mouse switch using a prying tool or your hands.

Be careful not to lose the white plastic part from the mouse switch.

Step 8

Find the place where more tension is needed.
Use a prying tool or your hand to give more tension to the copper piece, making sure the copper is curved.

Find the place where more tension is needed.

Use a prying tool or your hand to give more tension to the copper piece, making sure the copper is curved.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 1 other contributor

                    Jisuk Kang

Member since: 07/05/2020

319 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       York University, Team S1-G25, Allen Summer 2020                        

                                                  Member of York University, Team S1-G25, Allen Summer 2020 



                    YORK-ALLEN-SU20S1G25                     


                                            1 Member                     


                                            2 Guides authored

Катерина Шумакова - Dec 6, 2020

Worked, thanks

rel - Aug 18, 2022

step 8 made no sense and had to google it

VampireKing - Nov 26, 2022

Worked!!! I had this problem for years, even stoped playing valorant bacause of that. Thanks

Siim - Jan 12, 2023

I could not open these screws :( What are the screwdriver size to open these?

Introduction#

What you need#

Team#

Introduction

What you need

Team