Difficulty

Easy

Steps

11

Time Required

                          10 - 15 minutes

Sections

1

  • How to Fix a Screw-less Jammed Flexi Retractable Dog Leash
  • 11 steps

Flags

0

  • BackPet Supply

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              How to Fix a Screw-less Jammed Flexi Retractable Dog Leash
  • Locate the detachable T-shaped opening at the bottom of the dog leash.
  • Insert a pry tool into the bottom of the “T”.

Locate the detachable T-shaped opening at the bottom of the dog leash.

Insert a pry tool into the bottom of the “T”.

1024

Step 2

  • Insert fingers into the gap made by the screwdriver and pull apart.
  • The case may take some effort to pry apart.
  • Completely separate the two halves of the case.
  • The leash lock, rope, roll, and detachable hole that allows the roll out of the case are not attached to the case and may fall out upon opening the case.

Insert fingers into the gap made by the screwdriver and pull apart.

The case may take some effort to pry apart.

Completely separate the two halves of the case.

The leash lock, rope, roll, and detachable hole that allows the roll out of the case are not attached to the case and may fall out upon opening the case.

Step 3

  • Examine the exposed components.
  • Leash Roll
  • Leash Rope
  • Leash Lock
  • Detachable hole that allows the rope out of the case

Examine the exposed components.

Leash Roll

Leash Rope

Leash Lock

Detachable hole that allows the rope out of the case

Step 4

  • Lift up the leash lock to remove it from the case and place it aside.

Lift up the leash lock to remove it from the case and place it aside.

Step 5

  • Lift up the detachable hole that allows the rope out of the case. Remove it from the case and place it aside.

Lift up the detachable hole that allows the rope out of the case. Remove it from the case and place it aside.

Step 6

  • Examine the coil of the rope around the roll to spot any issues.
  • Issues may include tangles, twists, knots, or debris.
  • Unravel the rope from the roll in a counter-clockwise motion.
  • Remove any tangles, twists, knots, or debris interfering with the rope.

Examine the coil of the rope around the roll to spot any issues.

Issues may include tangles, twists, knots, or debris.

Unravel the rope from the roll in a counter-clockwise motion.

Remove any tangles, twists, knots, or debris interfering with the rope.

Step 7

  • Let the rope wind back up, making sure to keep it aligned, straight, and flat against the roll.

Let the rope wind back up, making sure to keep it aligned, straight, and flat against the roll.

Step 8

  • Replace the detachable hole that allows the rope out of the case into its slot at the top of one of the case halves.
  • Keep the case on a flat surface after reattachment to ensure the leash opening does not fall out while replacing other components.

Replace the detachable hole that allows the rope out of the case into its slot at the top of one of the case halves.

Keep the case on a flat surface after reattachment to ensure the leash opening does not fall out while replacing other components.

Step 9

  • Place the leash lock back into its place behind the detachable hole that allows the rope out of the case, and on top of the spring.

Place the leash lock back into its place behind the detachable hole that allows the rope out of the case, and on top of the spring.

Step 10

  • Find the locking screws on both halves of the cases.
  • Align the locking screws with their corresponding holes.
  • Place the two case halves atop one another and clamp the two halves together.

Find the locking screws on both halves of the cases.

Align the locking screws with their corresponding holes.

Place the two case halves atop one another and clamp the two halves together.

Step 11

  • Press together very tightly to finish reassembly.

Press together very tightly to finish reassembly.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors 


                    [deleted]

Member since: 02/20/2020

229 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges