How To Clean Nikon Coolpix S30 Lens Repair Guide

Difficulty

Difficult

Steps

Time Required

                          15 - 20 minutes

Sections

Batteries
3 steps
How To Clean Nikon Coolpix S30 Lens
6 steps

Flags

BackNikon Coolpix S30
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

If the camera is taking fuzzy pictures it may be due to debris blocking the lens.

What you need

Step 1

              Batteries

Slide the battery cover to the right.
The hinge is on the left side of the cover which will allow the cover to stay attached.

Slide the battery cover to the right.

The hinge is on the left side of the cover which will allow the cover to stay attached.

1024

Step 2

Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed.

Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed.

Step 3

Remove the batteries by gently tipping the camera.

Remove the batteries by gently tipping the camera.

Step 4

              How To Clean Nikon Coolpix S30 Lens

Remove the four screws the hold the back of the case to the rest of the camera.

Remove the four screws the hold the back of the case to the rest of the camera.

Step 5

Remove the left screw from the bottom of the camera first. This can be done using the same T5 tip.
Unscrew the screw on the right using a different attachment: PH000 (it is a small Phillip’s head)

Remove the left screw from the bottom of the camera first. This can be done using the same T5 tip.

Unscrew the screw on the right using a different attachment: PH000 (it is a small Phillip’s head)

Step 6

Remove back case from the rest of the camera carefully.

Remove back case from the rest of the camera carefully.

Step 7

Remove the three screws the secure the motherboard to the front case.

Remove the three screws the secure the motherboard to the front case.

Step 8

Remove the motherboard from the front case.
Leave the red and black wire attached but lay the piece in front of the case.

Remove the motherboard from the front case.

Leave the red and black wire attached but lay the piece in front of the case.

Step 9

Wipe the lens and the clear plastic on the front case to remove debris.

Wipe the lens and the clear plastic on the front case to remove debris.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Courtney Weida

Member since: 01/21/2015

152 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Penn State, Team 2-4, Kaschak Winter 2015                        

                                                  Member of Penn State, Team 2-4, Kaschak Winter 2015 



                    PSU-KASCHAK-W15S2G4                     


                                            4 Members                     


                                            5 Guides authored

Dylan Keiter - Mar 30, 2015

The first three steps are redundant because you already included the prerequisite guide for removal of the batteries.

Introduction#

What you need#

Team#

Introduction

What you need

Team