Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

1

  • How to clean and maintain your Vape Mod
  • 8 steps

Flags

0

  • BackE-Cigarette Vaporizer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              How to clean and maintain your Vape Mod
  • Although maintenance for your Vape Mod shouldn’t be dangerous, it can be messy. It is recommended to do this on top of a paper towel.
  • Start by removing the top cap of your Vape Mod.

Although maintenance for your Vape Mod shouldn’t be dangerous, it can be messy. It is recommended to do this on top of a paper towel.

Start by removing the top cap of your Vape Mod.

1024

Step 2

  • Unscrew RDA (rebuildable dripping atomizer) and take it off.

Unscrew RDA (rebuildable dripping atomizer) and take it off.

Step 3

  • Many Vape Mods are different, you might have to take out your battery in a different way than shown.
  • At the bottom of the tube, unscrew the firing pin.
  • Take the battery out of the Vape Mod.

Many Vape Mods are different, you might have to take out your battery in a different way than shown.

At the bottom of the tube, unscrew the firing pin.

Take the battery out of the Vape Mod.

Step 4

  • Inspect all of the parts that will need to be cleaned:
  • The firing pin
  • The RDA threading
  • The bottom of the inside of the tube

Inspect all of the parts that will need to be cleaned:

The firing pin

The RDA threading

The bottom of the inside of the tube

Step 5

  • Clean the Firing pin by dipping a paper towel into hot water.
  • Carefully rotate the hot towel around the middle area, rubbing the grime away.

Clean the Firing pin by dipping a paper towel into hot water.

Carefully rotate the hot towel around the middle area, rubbing the grime away.

Step 6

  • Get a new paper towel wet with the hot water.
  • Clean the RDA threading by rotating the wet paper towel back and forth across it.

Get a new paper towel wet with the hot water.

Clean the RDA threading by rotating the wet paper towel back and forth across it.

Step 7

  • Get a new paper towel wet with the hot water.
  • Twist it until it can easily fit inside of the tube.
  • Use your finger or another long tool to rotate the paper towel along the sides and the bottom of the tube.

Twist it until it can easily fit inside of the tube.

Use your finger or another long tool to rotate the paper towel along the sides and the bottom of the tube.

Step 8

  • Put your Vape Mod back together by doing steps 1 - 2 in reverse. (Leave the mouthpiece of the top cap off).
  • Careful, firing your Vape Mod produces heat and can make the device HOT!
  • Fire your Vape Mod. If the coils are heating up, it has been fixed!

Put your Vape Mod back together by doing steps 1 - 2 in reverse. (Leave the mouthpiece of the top cap off).

Careful, firing your Vape Mod produces heat and can make the device HOT!

Fire your Vape Mod. If the coils are heating up, it has been fixed!

If your Vape Mod is still not firing, consider getting a new build.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.

Author

                                      with 3 other contributors 


                    Jessie Smith

Member since: 09/29/2015

677 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 14-3, Green Fall 2015                        

                                                  Member of Cal Poly, Team 14-3, Green Fall 2015 



                    CPSU-GREEN-F15S14G3                     


                                            4 Members                     


                                            5 Guides authored