How To Access The Internal Components Of An Hp 15 R011Dx Repair Guide

Difficulty

Easy

Steps

Time Required

                          6 minutes

Sections

Battery
2 steps
How to Access the Internal Components of an HP 15-R011DX
5 steps

Flags

BackHP 15-R011DX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Slide the lock mechanism on the left side of the laptop to the right.

Slide the lock mechanism on the left side of the laptop to the right.

1024

Step 2

While holding the right slide mechanism, remove the battery from the laptop.
The battery is not pictured here because it is missing from this particular device.

While holding the right slide mechanism, remove the battery from the laptop.

The battery is not pictured here because it is missing from this particular device.

Step 3

              How to Access the Internal Components of an HP 15-R011DX

Flip the laptop over to reveal screw locations.
Use a metal spudger to remove the two rear rubber feet. There are screws hidden underneath them.

Flip the laptop over to reveal screw locations.

Use a metal spudger to remove the two rear rubber feet. There are screws hidden underneath them.

Step 4

Remove the twelve 5mm Phillips #1 screws on the back of the laptop.

Remove the twelve 5mm Phillips #1 screws on the back of the laptop.

Step 5

Remove the DVD drive from the laptop.
Remove the two 3 mm Phillips #1 screws underneath the DVD drive.

Remove the DVD drive from the laptop.

Remove the two 3 mm Phillips #1 screws underneath the DVD drive.

Step 6

Flip the laptop and open.
Detach the keyboard by prying it free from the laptop using a spudger.
Do not completely remove the keyboard yet. It is still attached by a ribbon cable.
Disconnect the keyboard ribbon cable.

Flip the laptop and open.

Detach the keyboard by prying it free from the laptop using a spudger.

Do not completely remove the keyboard yet. It is still attached by a ribbon cable.

Disconnect the keyboard ribbon cable.

Step 7

Disconnect the two narrow ribbon cables to the left of the keyboard connection.
Remove five 4 mm Phillips #1 screws from the metal tray for the keyboard.
Pry open the plastic casing using a spudger.
If struggling to remove the plastic case, check that all screws have been removed.

Disconnect the two narrow ribbon cables to the left of the keyboard connection.

Remove five 4 mm Phillips #1 screws from the metal tray for the keyboard.

Pry open the plastic casing using a spudger.

If struggling to remove the plastic case, check that all screws have been removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Ethan Guillotte

Member since: 03/20/2019

436 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S2-G4, Bailey Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G4, Bailey Spring 2019 



                    UMASSD-BAILEY-S19S2G4                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team