Difficulty
Easy
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Power Button
- 4 steps
Flags
0
BackHover-1 Ultra
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Button
- Orient the hoverboard so that the pads are facing down.
- With the Phillips #1 screwdriver, remove all 18 of the screws on the underside of the hoverboard.
- Carefully remove the shell, lifting directly up.
Orient the hoverboard so that the pads are facing down.
With the Phillips #1 screwdriver, remove all 18 of the screws on the underside of the hoverboard.
Carefully remove the shell, lifting directly up.
1024
Step 2
- Unscrew the power button using your hands or an adjustable crescent wrench.
- Turn the power button counter-clockwise to release from the shell.
Unscrew the power button using your hands or an adjustable crescent wrench.
Turn the power button counter-clockwise to release from the shell.
Step 3
- Unclip the red and black power cables that are attached to the port from the motherboard.
Unclip the red and black power cables that are attached to the port from the motherboard.
Step 4
- Remove the power button from the hoverboard assembly.
Remove the power button from the hoverboard assembly.
To reassemble your device, follow the instructions for step 1 in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Camron Clifton
Member since: 10/22/2018
370 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
UC Davis, Team S7-G5, Lore Fall 2018
Member of UC Davis, Team S7-G5, Lore Fall 2018
UCD-LORE-F18S7G5
3 Members
3 Guides authored