Hover 1 Maverick Motor Wheel Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          30 minutes            

Sections

2

• Motherboard
• 4 steps
• Motor
• 2 steps

Flags

0

• BackHover-1 Maverick

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.
• Open the shell.
• There is one motherboard on each side of the device located near the wheels.

Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

Open the shell.

There is one motherboard on each side of the device located near the wheels.

1024

Step 2

• Disconnect the battery to prevent any electrical currents from coming through the wires.

Disconnect the battery to prevent any electrical currents from coming through the wires.

Step 3

• Squeeze and pull on the wires to detach them from the motherboard.

Squeeze and pull on the wires to detach them from the motherboard.

Step 4

• Remove the four 8mm Phillips #1 screws.
• Remove the motherboard from the device.
• Repeat for the other motherboard.

Remove the four 8mm Phillips #1 screws.

Remove the motherboard from the device.

Repeat for the other motherboard.

Step 5

              Motor               

• After the motherboard is removed from either side, remove the four 15 mm hex screws with a 5mm Allen wrench.
• Remove the metal covering from over the motor.

After the motherboard is removed from either side, remove the four 15 mm hex screws with a 5mm Allen wrench.

Remove the metal covering from over the motor.

Step 6

• The motor is attached to the wheel, so in order to remove the motor, you must take out the entire wheel.

The motor is attached to the wheel, so in order to remove the motor, you must take out the entire wheel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Piper Feldman                     

Member since: 01/23/2020

391 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team S2-G2, White Winter 2020                        

                                                  Member of Cal Poly, Team S2-G2, White Winter 2020 



                    CPSU-WHITE-W20S2G2                     


                                            2 Members                     


                                            4 Guides authored