Hover 1 Maverick Battery Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

• Battery
• 3 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackHover-1 Maverick

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.
• Remove the shell.

Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

Remove the shell.

1024

Step 2

• Remove the four 8mm Phillips #1 screws holding down the black plastic casing.
• Lift off the black plastic retaining bracket.

Remove the four 8mm Phillips #1 screws holding down the black plastic casing.

Lift off the black plastic retaining bracket.

Step 3

• Pull the battery upward lightly to remove from the device.
• The battery is secured to the device with adhesive tape.

Pull the battery upward lightly to remove from the device.

The battery is secured to the device with adhesive tape.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Piper Feldman                     

Member since: 01/23/2020

391 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team S2-G2, White Winter 2020                        

                                                  Member of Cal Poly, Team S2-G2, White Winter 2020 



                    CPSU-WHITE-W20S2G2                     


                                            2 Members                     


                                            4 Guides authored                     

Barry Rogers - Dec 30, 2021

Reply

What voltage should the battery put out? Mines is 30v, charger is green at the wall but still the board won’t turn on