Difficulty

Easy

Steps

7

Time Required

                          15 - 25 minutes

Sections

2

  • Bottom Shell
  • 4 steps
  • LED Headlights
  • 3 steps

Flags

0

  • BackHover-1 H1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Shell
  • Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
  • Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

1024

Step 2

  • Puncture the two black stickers by using the tip of a screwdriver.
  • Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Puncture the two black stickers by using the tip of a screwdriver.

Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Step 3

  • Lift each side of the bottom shell by pulling up.
  • When lifting the shell, take care to not tear any cables from their connectors.

Lift each side of the bottom shell by pulling up.

When lifting the shell, take care to not tear any cables from their connectors.

Step 4

  • Unplug the battery by pulling gently on both sides of the orange connector.

Unplug the battery by pulling gently on both sides of the orange connector.

Step 5

              LED Headlights
  • Unplug the lights from the battery by pulling gently on both sides of the black connector attached to the white wires.

Unplug the lights from the battery by pulling gently on both sides of the black connector attached to the white wires.

Step 6

  • Remove the vertical light from the shell by using your hands to pull it free from the surrounding shell.

Remove the vertical light from the shell by using your hands to pull it free from the surrounding shell.

Step 7

  • Remove two 8mm screws using a Phillips #0 screwdriver to rotate the screws counterclockwise.
  • Remove the horizontal light by using your fingers to pull the light up out of the shell.

Remove two 8mm screws using a Phillips #0 screwdriver to rotate the screws counterclockwise.

Remove the horizontal light by using your fingers to pull the light up out of the shell.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Sara Passantino

Member since: 10/08/2018

326 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S17-G6, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G6, White Fall 2018 



                    CPSU-WHITE-F18S17G6                     


                                            4 Members                     


                                            7 Guides authored