Difficulty
Moderate
Steps
6
Time Required
55 minutes
Sections
1
- Motherboard
- 6 steps
Flags
0
BackHover-1 Eclipse
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Using a Phillips #1 Screwdriver, remove the eight 11mm screws that surround the edge of each shell piece.
- Using a Phillips #1 Screwdriver, remove the eight 13mm screws that surround the edge of both shell pieces.
- Remove the right side bottom shell piece.
Using a Phillips #1 Screwdriver, remove the eight 11mm screws that surround the edge of each shell piece.
Using a Phillips #1 Screwdriver, remove the eight 13mm screws that surround the edge of both shell pieces.
Remove the right side bottom shell piece.
1024
Step 2
- On the bottom, left side, shell pieces, there are some white and pink wires connecting the shell and the motherboard.
- On the circuit board by the speaker, carefully squeeze and unplug the small white headers that connect the shell piece to the hoverboard body.
- Follow the wires that connect the lights to the motherboard. Disconnect these wires from the motherboard by squeezing and pulling the small white headers.
- Now you can fully remove the bottom left shell piece.
On the bottom, left side, shell pieces, there are some white and pink wires connecting the shell and the motherboard.
On the circuit board by the speaker, carefully squeeze and unplug the small white headers that connect the shell piece to the hoverboard body.
Follow the wires that connect the lights to the motherboard. Disconnect these wires from the motherboard by squeezing and pulling the small white headers.
Now you can fully remove the bottom left shell piece.
Step 3
- Unplug the yellow tipped plug, Xt60, attached to the red and black cord on the non-battery side.
Unplug the yellow tipped plug, Xt60, attached to the red and black cord on the non-battery side.
Step 4
- Unplug the yellow tipped plug attached to the red and black cords.
- Unplug the black headers attached to the white, skinny cord.
- Unplug the green, blue and yellow plugs by pressing down the silver, under the clear plastic and pulling it apart.
Unplug the yellow tipped plug attached to the red and black cords.
Unplug the black headers attached to the white, skinny cord.
Unplug the green, blue and yellow plugs by pressing down the silver, under the clear plastic and pulling it apart.
Step 5
- Unplug the white header attached to the pink and white cord.
- Using a Phillips #1 screwdriver, remove the four screws from each corner of the motherboard.
- Repeat steps 3 and 4 on the other side.
Unplug the white header attached to the pink and white cord.
Using a Phillips #1 screwdriver, remove the four screws from each corner of the motherboard.
Repeat steps 3 and 4 on the other side.
Step 6
- You have now removed the motherboards from both sides.
You have now removed the motherboards from both sides.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Mina Dedijer
Member since: 10/10/2019
545 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team S12-G4, Regan Fall 2019
Member of Cal Poly, Team S12-G4, Regan Fall 2019
CPSU-REGAN-F19S12G4
4 Members
5 Guides authored
Frank - Jan 6, 2021
Reply
Can you please drop links to purchase the 2 motherboards?
Dave - Jul 13, 2021
Reply
Hi
wondering if you know the part numbers and where to obtain the boards?
Ashton Mcalvain - Jul 26, 2021
Reply
We’re do you get the boards at I really need them
Hector Ortiz - Oct 20, 2021
Reply
We’re do get the boards?
william bowen - Oct 31, 2021
Reply
Any idea where to buy parts and the price?
