Hover 1 Coast Board Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes

Sections

Board Battery
4 steps

Flags

BackHover-1 Coast
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Board Battery

To remove the battery on the Hover-1 Coast, you must uncover the screws on the top of the board.
Using a pick tool, puncture the grip tape and expose the screws.
Loosen all four 1" screws using a Phillips #1 screwdriver.

To remove the battery on the Hover-1 Coast, you must uncover the screws on the top of the board.

Using a pick tool, puncture the grip tape and expose the screws.

Loosen all four 1" screws using a Phillips #1 screwdriver.

1024

Step 2

Now pull the black protective cover off the board.
Locate the battery.

Now pull the black protective cover off the board.

Locate the battery.

Step 3

The battery is connected by these two sets of wires.
Remove the yellow wire first by pulling the two wires gently in opposite directions.
Now pull apart the black wire by gently pulling the two wires in opposite directions.

The battery is connected by these two sets of wires.

Remove the yellow wire first by pulling the two wires gently in opposite directions.

Now pull apart the black wire by gently pulling the two wires in opposite directions.

Step 4

Once the battery has been disconnected, gently pry the battery upward.
It is important to use a plastic opening tool to avoid puncturing the battery.
Once the battery is freed, remove it with your hands.
The battery is glued to the case and will require some effort to remove.

Once the battery has been disconnected, gently pry the battery upward.

It is important to use a plastic opening tool to avoid puncturing the battery.

Once the battery is freed, remove it with your hands.

The battery is glued to the case and will require some effort to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Jace Oppenlander

Member since: 10/04/2018

545 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Linn Benton Community College, Team S2-G2, Karnes Fall 2018                        

                                                  Member of Linn Benton Community College, Team S2-G2, Karnes Fall 2018 



                    LBCC-KARNES-F18S2G2                     


                                            3 Members                     


                                            5 Guides authored

Phil - Feb 8, 2020

Where can you order a replacement battery?

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team