Difficulty

Moderate

Steps

5

Time Required

                          15 - 25 minutes

Sections

2

  • Hover-1 Chrome Disassembly
  • 3 steps
  • Battery
  • 2 steps

Flags

0

  • BackHover-1 Chrome

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hover-1 Chrome Disassembly
  • Flip the Hover-1 Chrome upside down.
  • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.
  • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

Flip the Hover-1 Chrome upside down.

Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

1024

Step 2

  • Lift the shell without the speaker grille and unplug the battery.

Lift the shell without the speaker grille and unplug the battery.

Step 3

  • Lift the shell with the speaker grille.
  • Unplug the speaker.
  • Unplug the LEDs.
  • Unplug the power button
  • Unplug the charging port.

Lift the shell with the speaker grille.

Unplug the speaker.

Unplug the LEDs.

Unplug the power button

Unplug the charging port.

Step 4

              Battery
  • Place the metal spudger end between the blue battery and the adhesive pad that attaches it to the metal body.
  • Use the metal spudger only as a last resort if the adhesive is too strong for either your hands or other plastic prying tools.
  • Use the spudger to pry the battery loose from the adhesive.

Place the metal spudger end between the blue battery and the adhesive pad that attaches it to the metal body.

Use the metal spudger only as a last resort if the adhesive is too strong for either your hands or other plastic prying tools.

Use the spudger to pry the battery loose from the adhesive.

Step 5

  • Pull and wiggle the battery completely off of the adhesive using your hands.
  • Remove the battery from the body.

Pull and wiggle the battery completely off of the adhesive using your hands.

Remove the battery from the body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Nick McGuire

Member since: 10/08/2018

551 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S4-G1, White Fall 2018                        

                                                  Member of Cal Poly, Team S4-G1, White Fall 2018 



                    CPSU-WHITE-F18S4G1                     


                                            4 Members                     


                                            6 Guides authored