Difficulty

Moderate

Steps

6

Time Required

                          7 minutes

Sections

2

  • HEPA Filter
  • 3 steps
  • Motor Assembly
  • 3 steps

Flags

0

  • BackHoover Windtunnel Air Steerable Upright

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HEPA Filter
  • Put the cleaner into the upright position, turn the power off, and unplug the power cord.

Put the cleaner into the upright position, turn the power off, and unplug the power cord.

1024

Step 2

  • Remove the dirt cup from the cleaner.
  • The HEPA filter is located under the dirt cup and under where it says HEPA.
  • Twist the top counterclockwise to unlock the cap.

Remove the dirt cup from the cleaner.

The HEPA filter is located under the dirt cup and under where it says HEPA.

Twist the top counterclockwise to unlock the cap.

Step 3

  • Lift the HEPA filter out.
  • Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.
  • Do not wash the HEPA Filter.

Lift the HEPA filter out.

Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.

Do not wash the HEPA Filter.

Step 4

              Motor Assembly
  • Remove the 4 retaining screws and remove the filter tray.
  • Screw lengths are approximately 3/4".

Remove the 4 retaining screws and remove the filter tray.

Screw lengths are approximately 3/4".

Step 5

  • Pull the motor housing vertically to dislodge the motor.

Pull the motor housing vertically to dislodge the motor.

Step 6

  • Use a plastic spudger or opening tool to press on the small circle and wiggle clips free.

Use a plastic spudger or opening tool to press on the small circle and wiggle clips free.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    steven hoover

Member since: 09/26/2017

250 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team S7-G2, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S7-G2, Banghart Fall 2017 



                    CPSU-BANGHART-F17S7G2                     


                                            5 Members                     


                                            14 Guides authored