Hoover Windtunnel 2 Rewind Belt And Roller Brush Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          5 minutes            

Sections

1

• Belt and Roller Brush
• 3 steps

Flags

0

• BackHoover WindTunnel 2 Rewind

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The belt and roller brush are one assembly, so in order to replace one you must remove the other.

Before you begin the repair process ensure that your vacuum is turned off and unplugged

What you need

Step 1

              Belt and Roller Brush               

• Remove the four 20 mm Phillips #1 head screws holding the top cover on.
• Lift off the cover.

Remove the four 20 mm Phillips #1 head screws holding the top cover on.

Lift off the cover.

1024

Step 2

• Grab on both ends of the roller brush, lifting it and the attached belt clear of the housing.

Grab on both ends of the roller brush, lifting it and the attached belt clear of the housing.

Step 3

• Reinstall belt and roller making sure that the white text is facing outwards on the belt.
• Placing the roller brush in its guides will put some tension on the belt after the roller is in place spin it with your hand a couple times to ensure that it spins freely.

Reinstall belt and roller making sure that the white text is facing outwards on the belt.

Placing the roller brush in its guides will put some tension on the belt after the roller is in place spin it with your hand a couple times to ensure that it spins freely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Thomas Eggenberger                     

Member since: 01/22/2018

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team S11-G4, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S11-G4, Banghart Winter 2018 



                    CPSU-BANGHART-W18S11G4                     


                                            5 Members                     


                                            10 Guides authored