Difficulty
Moderate
Steps
3
Time Required
15 minutes
Sections
2
- Brush Roll
- 2 steps
- Belt
- 1 step
Flags
0
BackHoover T-Series WindTunnel Pet UH70102
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Brush Roll
- Push the red release lever to the right.
- Turn the red switch counterclockwise.
- Tilt the bottom of the plastic tray out towards you and pull it off the vacuum.
Push the red release lever to the right.
Turn the red switch counterclockwise.
Tilt the bottom of the plastic tray out towards you and pull it off the vacuum.
1024
Step 2
- Pull the brush roll out of vacuum.
- Remove the belt from brush roller
Pull the brush roll out of vacuum.
Remove the belt from brush roller
Step 3
Belt
- Remove the belt that’s to the right of where the brush roll was by pulling the bottom off of the pin.
Remove the belt that’s to the right of where the brush roll was by pulling the bottom off of the pin.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Sophia Stockburger
Member since: 01/22/2018
566 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team S11-G2, Banghart Winter 2018
Member of Cal Poly, Team S11-G2, Banghart Winter 2018
CPSU-BANGHART-W18S11G2
5 Members
9 Guides authored
