Hoover T Series Windtunnel Pet Uh30310 Motor Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          25 - 30 minutes            

Sections

1

• Motor
• 10 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Missed a Step

Oops! This guide is currently missing some important steps.

• BackHoover T-Series WindTunnel Pet UH30310

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motor               

• Depress the hose-release tab.

Depress the hose-release tab.

1024

Step 2

• Next, remove the hose from the connector, near the top of the vacuum’s rear. This can be achieved by twisting and then pulling down.

Next, remove the hose from the connector, near the top of the vacuum’s rear. This can be achieved by twisting and then pulling down.

Step 3

• Use a Phillips #1 screwdriver to remove the two screws on the part holding the hose to the back of the vacuum.

Use a Phillips #1 screwdriver to remove the two screws on the part holding the hose to the back of the vacuum.

Step 4

• Use a Phillips #1 screwdriver to remove the two screws that secure the hose-release tab.

Use a Phillips #1 screwdriver to remove the two screws that secure the hose-release tab.

Step 5

• Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum holding the tab on the left of the vacuum.

Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum holding the tab on the left of the vacuum.

Step 6

• Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum head holding down the tab on the right.
• To remove the tab, slide backwards and then pull up. There is a tab holding the piece down so use force if necessary.

Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum head holding down the tab on the right.

To remove the tab, slide backwards and then pull up. There is a tab holding the piece down so use force if necessary.

Step 7

• Slide the belt off of the metal rod on the left of the vacuum shaft. Pull the vacuum up and it should easily separate into two pieces.

Slide the belt off of the metal rod on the left of the vacuum shaft. Pull the vacuum up and it should easily separate into two pieces.

Step 8

• Use a Phillips #1 screwdriver to remove the 6 screws on the back and bottom of the vacuum shaft.

Use a Phillips #1 screwdriver to remove the 6 screws on the back and bottom of the vacuum shaft.

Step 9

• The top of the motor casing should then fold open, revealing the motor.

The top of the motor casing should then fold open, revealing the motor.

Step 10

• The motor can now be accessed for replacement or repair

The motor can now be accessed for replacement or repair

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Anthony Garcia                     

Member since: 01/18/2018

223 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team S12-G4, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S12-G4, Banghart Winter 2018 



                    CPSU-BANGHART-W18S12G4                     


                                            5 Members                     


                                            9 Guides authored