Hoover T Series Windtunnel Pet Uh30310 Height Adjustment Wheels Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          8 - 15 minutes            

Sections

1

• Height Adjustment Wheels
• 7 steps

Flags

0

• BackHoover T-Series WindTunnel Pet UH30310

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Height Adjustment Wheels               

• Place the vacuum on its back.
• Push the red switch to the left.
• The black cover will then pop out. Remove the cover.

Place the vacuum on its back.

Push the red switch to the left.

The black cover will then pop out. Remove the cover.

1024

Step 2

• Locate the red switch near the head of the vacuum.
• Push the switch left.
• This will pop out the plastic base plate. Remove the plate from the vacuum.

Locate the red switch near the head of the vacuum.

Push the switch left.

This will pop out the plastic base plate. Remove the plate from the vacuum.

Step 3

• Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.

Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.

Step 4

• Remove screws from the left side of the white plastic frame.

Remove screws from the left side of the white plastic frame.

Step 5

• Pull the white plastic frame away from the vacuum.
• Slide the vacuum belt off the metal rod.
• Pull the brush off the vacuum.

Pull the white plastic frame away from the vacuum.

Slide the vacuum belt off the metal rod.

Pull the brush off the vacuum.

Step 6

• Remove the screws at the bottom of the white frame near the roller.

Remove the screws at the bottom of the white frame near the roller.

Step 7

• Pop off the right side of the white frame.
• Pull down the blue hinge and roller.
• Pull free the roller from the vacuum.

Pop off the right side of the white frame.

Pull down the blue hinge and roller.

Pull free the roller from the vacuum.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Nathan Yung                     

Member since: 01/18/2018

241 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team S12-G4, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S12-G4, Banghart Winter 2018 



                    CPSU-BANGHART-W18S12G4                     


                                            5 Members                     


                                            9 Guides authored                     

David Blair - Apr 8, 2022

Reply

HOOVER 30310 brush roller stops when the handle is released for vacuuming. Begins again when handle raised and locked into upright position.