Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

2

  • Brush Roller
  • 3 steps
  • Hose
  • 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackHoover Power Path Pro Advanced

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Brush Roller
  • Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.
  • Lay the cleaner down horizontally with its wheels closest to the floor.

Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.

Lay the cleaner down horizontally with its wheels closest to the floor.

1024

Step 2

  • Hold the lower brush roll with both hands and pull outwards until it is detached.

Hold the lower brush roll with both hands and pull outwards until it is detached.

Step 3

  • Unscrew the 6 marked screws using a Phillips #2 head screwdriver.
  • Remove the brush roller.

Unscrew the 6 marked screws using a Phillips #2 head screwdriver.

Remove the brush roller.

Step 4

              Hose
  • Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.
  • They will also be indicated on the bottom of the vacuum.

Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

They will also be indicated on the bottom of the vacuum.

Step 5

  • Pull the red handle shown to remove the front suction unit from the cleaner.

Pull the red handle shown to remove the front suction unit from the cleaner.

Step 6

  • Unscrew the Phillips #2 screw at the bottom of the hose.

Unscrew the Phillips #2 screw at the bottom of the hose.

Step 7

  • Grab the attachment at tip of the hose and unscrew it. Pull outwards on the hose until completely removed.

Grab the attachment at tip of the hose and unscrew it. Pull outwards on the hose until completely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors 


                    Jose Andres Gonzalez Valdes

Member since: 01/22/2018

682 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S16-G5, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S16-G5, Banghart Winter 2018 



                    CPSU-BANGHART-W18S16G5                     


                                            5 Members                     


                                            15 Guides authored

Jennifer - Jan 3, 2019

Reply

Where can I find this replacement hose?

Leigh Robert Smith - May 20, 2021

Reply

Complete waste of $$, won’t pick up water unless you apply about 40 lbs of downward force on the %#*@ thing, I tried all the trouble shooting tips, no change, maybe used 3 times. The attachment same thing nada. Basically a toy.

Eryk H. - Sep 6, 2021

Reply

Where can I purchase the lower hose?

Jeffery Alger - Aug 21, 2022

Reply

I’ve been trying to find the hose for mine for two years now I even called hoover and they tell me it’s unavailable maybe I need to find a Hoover scrap yard lol if anyone knows where I can get one please let me know via email at jefferyalger1959@gmail.com