Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

1

  • Honeywell Turbo Force Air Circulator Fan Disassembly
  • 12 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHoneywell Turbo Force Air Circulator Fan

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Overview
  • Honeywell Turbo Force 12" Air Circulator.
  • Dimensions - 11.22" x 9.8" x 13.98", 5.7 lbs.

Honeywell Turbo Force 12" Air Circulator.

Dimensions - 11.22" x 9.8" x 13.98", 5.7 lbs.

1024

Step 2

              Removing Scews
  • Remove the 6 screws from the backside of the fan.

Remove the 6 screws from the backside of the fan.

Step 3

              Removing the grill
  • Remove the front grill cover.

Remove the front grill cover.

Step 4

              Removing the plastic ring
  • Remove the inside plastic ring around center shaft.
  • Enables the fan blades to be removed.
  • Use a flat head screwdriver to remove the plastic ring.

Remove the inside plastic ring around center shaft.

Enables the fan blades to be removed.

Use a flat head screwdriver to remove the plastic ring.

Step 5

              Removing Fan blades
  • Remove the fan blades by pulling.

Remove the fan blades by pulling.

Step 6

              Detaching wire covering
  • Remove 1 screw inside to detach the plastic wire covering.

Remove 1 screw inside to detach the plastic wire covering.

Step 7

              Removing the wire protector piece
  • Remove the plastic covering.

Remove the plastic covering.

Step 8

              Unscrewing the motor
  • Remove the 2 screws on the motor.
  • This allows the motor to pull away from the housing.

Remove the 2 screws on the motor.

This allows the motor to pull away from the housing.

Step 9

              Pulling the Motor from the Housing
  • Pull the motor away from the housing to expose wiring.
  • Use caution to not detach the wiring from the back.

Pull the motor away from the housing to expose wiring.

Use caution to not detach the wiring from the back.

Step 10

              Unscrewing the Rotor
  • Remove the two screws from the back of the motor.
  • Allows the rotor and front/back bearings to be removed.

Remove the two screws from the back of the motor.

Allows the rotor and front/back bearings to be removed.

Step 11

              Removing the Rotor
  • Remove the rotor and front bearings by pulling.

Remove the rotor and front bearings by pulling.

Step 12

              Realigning the Bearings
  • During reassembly, re-align the bearings by tapping on the shaft.

During reassembly, re-align the bearings by tapping on the shaft.

To reassemble the fan, follow these instructions in reverse order. Note that Step 12 is an extra step in the reassembly process to follow.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Donovan Williams

Member since: 04/12/2022

235 Reputation

                                      1 Guide authored                  



                       Badges:
                       3