Difficulty

Moderate

Steps

6

Time Required

                          15 minutes            

Sections

3

  • Honda Rear Tine Tiller FRC800K1A Safety Precautions
  • 2 steps
  • Outer Belt Cover
  • 2 steps
  • V-Belt
  • 2 steps

Flags

0

  • BackHonda Rear Tine Tiller FRC800K1A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disconnect the spark plug wire               
  • Before you begin the repair, disconnect the spark plug wire.
  • Firmly grip the base of the connector and pull it away from the spark plug to disconnect it.

Before you begin the repair, disconnect the spark plug wire.

Firmly grip the base of the connector and pull it away from the spark plug to disconnect it.

1024

Step 2

              Turn off the fuel valve               
  • Flip the fuel valve switch to the off position.

Flip the fuel valve switch to the off position.

Step 3

              Remove outer belt cover               
  • Use a 14 mm socket to remove the bolt securing the outer belt cover.

Use a 14 mm socket to remove the bolt securing the outer belt cover.

Step 4

  • Tilt the outer belt cover down and pull it off of the lip on the inner belt cover to remove it.

Tilt the outer belt cover down and pull it off of the lip on the inner belt cover to remove it.

Step 5

              Remove the V-belt               
  • Push the V-belt towards the transmission pulley to release tension.
  • Slip the V-belt off of the groove in the pulley.

Push the V-belt towards the transmission pulley to release tension.

Slip the V-belt off of the groove in the pulley.

Step 6

  • Pull the V-belt down and out of the way of the two-prong belt guide.
  • Push the V-belt around and off of the motor pulley to remove.

Pull the V-belt down and out of the way of the two-prong belt guide.

Push the V-belt around and off of the motor pulley to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Carsten Frauenheim                     

Member since: 03/10/2020

81,713 Reputation

                                      330 Guides authored                  



                       Badges:
                       38







                                                        +35 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored