Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Spark Plug Cap Removal
  • 1 step
  • Throttle Lever
  • 5 steps

Flags

0

  • BackHonda Mid Tine Tiller FC600

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Spark Plug Cap
  • Before you begin, it’s important that you completely cut power to the tiller by disconnecting the spark plug. This will prevent the engine from accidentally starting up while you’re working on the tiller.
  • Grab the spark plug cap and pull it straight out to disconnect the spark plug from the engine.

Before you begin, it’s important that you completely cut power to the tiller by disconnecting the spark plug. This will prevent the engine from accidentally starting up while you’re working on the tiller.

Grab the spark plug cap and pull it straight out to disconnect the spark plug from the engine.

1024

Step 2

              Preparation
  • Push the throttle lever all the way down.

Push the throttle lever all the way down.

Step 3

              Remove the Throttle Lever
  • Remove the 23 mm-long Phillips #2 screw securing the throttle lever to the handlebar.
  • This screw is accompanied by a square nut. Be sure to retain it for reassembly.

Remove the 23 mm-long Phillips #2 screw securing the throttle lever to the handlebar.

This screw is accompanied by a square nut. Be sure to retain it for reassembly.

Step 4

              Remove the Small Throttle Cable Clip
  • Use a pair of needle-nose pliers to remove the small clip attached to the throttle cable.

Use a pair of needle-nose pliers to remove the small clip attached to the throttle cable.

Step 5

              Remove the Throttle Cable
  • Grab the open end of the throttle cable and pull it out of the throttle lever to free it from its recess.

Grab the open end of the throttle cable and pull it out of the throttle lever to free it from its recess.

Step 6

  • Continue to lift the throttle cable out of the throttle lever, making sure it clears the openings in the recess.

Continue to lift the throttle cable out of the throttle lever, making sure it clears the openings in the recess.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Craig Lloyd

Member since: 02/10/2016

28,344 Reputation

                                      82 Guides authored                  



                       Badges:
                       41







                                                        +38 more badges